--- arch/arm/mach-msm/board-jf_cri.c
+++ arch/arm/mach-msm/board-jf_cri.c
@@ -204,7 +204,6 @@ static void sensor_power_on_vdd(int, int
#define PCIE_PWR_EN_PMIC_GPIO 13
#define PCIE_RST_N_PMIC_MPP 1
-
static int sec_tsp_synaptics_mode;
static int lcd_tsp_panel_version;
@@ -369,7 +368,6 @@ static struct i2c_board_info max77693_i2
};
#endif
-
#if defined(CONFIG_IR_REMOCON_FPGA)
static void irda_wake_en(bool onoff)
{
@@ -1424,7 +1422,7 @@ static void mhl_gpio_config(int data)
pr_err("mhl_vsil gpio_request is failed\n");
return;
}
- gpio_tlmm_config(GPIO_CFG(GPIO_MHL_INT, 0, GPIO_CFG_INPUT,
+ gpio_tlmm_config(GPIO_CFG(GPIO_MHL_INT, 0, GPIO_CFG_INPUT,
GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), 1);
} else
gpio_free(GPIO_MHL_INT);
@@ -1482,7 +1480,7 @@ static void sii8240_hw_onoff(bool onoff)
if (IS_ERR(mhl_l32))
return ;
rc = regulator_set_voltage(mhl_l32,
- 3300000, 3300000);
+ 3300000, 3300000);
}
rc = regulator_enable(mhl_l32);
if (rc)
@@ -1517,11 +1515,12 @@ static void sii8240_hw_onoff(bool onoff)
}
usleep_range(10000, 20000);
+
if (system_rev >= 6)
ice_gpiox_set(FPGA_GPIO_MHL_RST, 0);
if (system_rev < 6)
gpio_direction_output(GPIO_MHL_RST, 0);
- if (system_rev >= 4 && system_rev < 6)
+ if (system_rev >= 4 && system_rev < 6)
pm8xxx_gpio_config(GPIO_MHL_VSIL, &pmic_mhl_en_parm);
}
@@ -1548,10 +1547,12 @@ static void sii8240_hw_reset(void)
if (gpio_direction_output(GPIO_MHL_RST, 1))
pr_err("%s error in making GPIO_MHL_RST HIGH\n",
__func__);
+
usleep_range(5000, 20000);
if (gpio_direction_output(GPIO_MHL_RST, 0))
pr_err("%s error in making GPIO_MHL_RST Low\n",
__func__);
+
usleep_range(10000, 20000);
if (gpio_direction_output(GPIO_MHL_RST, 1))
pr_err("%s error in making GPIO_MHL_RST HIGH\n",
@@ -2255,6 +2256,7 @@ static int ice4_clock_en(int onoff)
}
return 0;
}
+
static void barcode_emul_poweron(int onoff)
{
int ret;
@@ -3134,9 +3136,9 @@ static struct platform_device msm_tsens_
};
static struct msm_thermal_data msm_thermal_pdata = {
- .sensor_id = 7,
+ .sensor_id = 0,
.poll_ms = 250,
- .limit_temp_degC = 60,
+ .limit_temp_degC = 75,
.temp_hysteresis_degC = 10,
.freq_step = 2,
};
projects / ziggy471-sgs4-jb.git / blobdiff