--- a/Documentation/i2c/instantiating-devices
+++ b/Documentation/i2c/instantiating-devices
@@ -100,7 +100,7 @@ static int __devinit usb_hcd_pnx4008_pro
(...)
i2c_adap = i2c_get_adapter(2);
memset(&i2c_info, 0, sizeof(struct i2c_board_info));
- strlcpy(i2c_info.name, "isp1301_pnx", I2C_NAME_SIZE);
+ strlcpy(i2c_info.type, "isp1301_pnx", I2C_NAME_SIZE);
isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info,
normal_i2c);
i2c_put_adapter(i2c_adap);
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 32
-EXTRAVERSION = .33-ck2
+EXTRAVERSION = .35-ck2
NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*
--- a/arch/mips/alchemy/mtx-1/platform.c
+++ b/arch/mips/alchemy/mtx-1/platform.c
@@ -28,6 +28,8 @@
#include <linux/mtd/physmap.h>
#include <mtd/mtd-abi.h>
+#include <asm/mach-au1x00/au1xxx_eth.h>
+
static struct gpio_keys_button mtx1_gpio_button[] = {
{
.gpio = 207,
@@ -140,10 +142,17 @@ static struct __initdata platform_device
&mtx1_mtd,
};
+static struct au1000_eth_platform_data mtx1_au1000_eth0_pdata = {
+ .phy_search_highest_addr = 1,
+ .phy1_search_mac0 = 1,
+};
+
static int __init mtx1_register_devices(void)
{
int rc;
+ au1xxx_override_eth_cfg(0, &mtx1_au1000_eth0_pdata);
+
rc = gpio_request(mtx1_gpio_button[0].gpio,
mtx1_gpio_button[0].desc);
if (rc < 0) {
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -117,7 +117,7 @@ int cpu_check_affinity(unsigned int irq,
int cpu_dest;
/* timer and ipi have to always be received on all CPUs */
- if (CHECK_IRQ_PER_CPU(irq)) {
+ if (CHECK_IRQ_PER_CPU(irq_to_desc(irq)->status)) {
/* Bad linux design decision. The mask has already
* been set; we must reset it */
cpumask_setall(irq_desc[irq].affinity);
--- a/arch/powerpc/include/asm/kexec.h
+++ b/arch/powerpc/include/asm/kexec.h
@@ -31,6 +31,10 @@
#define KEXEC_ARCH KEXEC_ARCH_PPC
#endif
+#define KEXEC_STATE_NONE 0
+#define KEXEC_STATE_IRQS_OFF 1
+#define KEXEC_STATE_REAL_MODE 2
+
#ifndef __ASSEMBLY__
#include <linux/cpumask.h>
#include <asm/reg.h>
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -56,7 +56,7 @@ struct paca_struct {
struct lppaca *lppaca_ptr; /* Pointer to LpPaca for PLIC */
#endif /* CONFIG_PPC_BOOK3S */
/*
- * MAGIC: the spinlock functions in arch/powerpc/lib/locks.c
+ * MAGIC: the spinlock functions in arch/powerpc/lib/locks.c
* load lock_token and paca_index with a single lwz
* instruction. They must travel together and be properly
* aligned.
@@ -76,6 +76,7 @@ struct paca_struct {
s16 hw_cpu_id; /* Physical processor number */
u8 cpu_start; /* At startup, processor spins until */
/* this becomes non-zero. */
+ u8 kexec_state; /* set when kexec down has irqs off */
#ifdef CONFIG_PPC_STD_MMU_64
struct slb_shadow *slb_shadow_ptr;
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -858,6 +858,7 @@
#define PV_970 0x0039
#define PV_POWER5 0x003A
#define PV_POWER5p 0x003B
+#define PV_POWER7 0x003F
#define PV_970FX 0x003C
#define PV_630 0x0040
#define PV_630p 0x0041
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -183,6 +183,7 @@ int main(void)
#endif /* CONFIG_PPC_STD_MMU_64 */
DEFINE(PACAEMERGSP, offsetof(struct paca_struct, emergency_sp));
DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id));
+ DEFINE(PACAKEXECSTATE, offsetof(struct paca_struct, kexec_state));
DEFINE(PACA_STARTPURR, offsetof(struct paca_struct, startpurr));
DEFINE(PACA_STARTSPURR, offsetof(struct paca_struct, startspurr));
DEFINE(PACA_USER_TIME, offsetof(struct paca_struct, user_time));
--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -162,6 +162,32 @@ static void crash_kexec_prepare_cpus(int
/* Leave the IPI callback set */
}
+/* wait for all the CPUs to hit real mode but timeout if they don't come in */
+static void crash_kexec_wait_realmode(int cpu)
+{
+ unsigned int msecs;
+ int i;
+
+ msecs = 10000;
+ for (i=0; i < NR_CPUS && msecs > 0; i++) {
+ if (i == cpu)
+ continue;
+
+ while (paca[i].kexec_state < KEXEC_STATE_REAL_MODE) {
+ barrier();
+ if (!cpu_possible(i)) {
+ break;
+ }
+ if (!cpu_online(i)) {
+ break;
+ }
+ msecs--;
+ mdelay(1);
+ }
+ }
+ mb();
+}
+
/*
* This function will be called by secondary cpus or by kexec cpu
* if soft-reset is activated to stop some CPUs.
@@ -419,6 +445,7 @@ void default_machine_crash_shutdown(stru
crash_kexec_prepare_cpus(crashing_cpu);
cpu_set(crashing_cpu, cpus_in_crash);
crash_kexec_stop_spus();
+ crash_kexec_wait_realmode(crashing_cpu);
if (ppc_md.kexec_cpu_down)
ppc_md.kexec_cpu_down(1, 0);
}
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -156,16 +156,23 @@ void kexec_copy_flush(struct kimage *ima
#ifdef CONFIG_SMP
-/* FIXME: we should schedule this function to be called on all cpus based
- * on calling the interrupts, but we would like to call it off irq level
- * so that the interrupt controller is clean.
- */
+static int kexec_all_irq_disabled;
+
static void kexec_smp_down(void *arg)
{
+ local_irq_disable();
+ mb(); /* make sure our irqs are disabled before we say they are */
+ get_paca()->kexec_state = KEXEC_STATE_IRQS_OFF;
+ while (kexec_all_irq_disabled == 0)
+ cpu_relax();
+ mb(); /* make sure all irqs are disabled before this */
+ /*
+ * Now every CPU has IRQs off, we can clear out any pending
+ * IPIs and be sure that no more will come in after this.
+ */
if (ppc_md.kexec_cpu_down)
ppc_md.kexec_cpu_down(0, 1);
- local_irq_disable();
kexec_smp_wait();
/* NOTREACHED */
}
@@ -193,20 +200,18 @@ static void wake_offline_cpus(void)
}
}
-static void kexec_prepare_cpus(void)
+static void kexec_prepare_cpus_wait(int wait_state)
{
int my_cpu, i, notified=-1;
wake_offline_cpus();
- smp_call_function(kexec_smp_down, NULL, /* wait */0);
my_cpu = get_cpu();
-
- /* check the others cpus are now down (via paca hw cpu id == -1) */
+ /* Make sure each CPU has atleast made it to the state we need */
for (i=0; i < NR_CPUS; i++) {
if (i == my_cpu)
continue;
- while (paca[i].hw_cpu_id != -1) {
+ while (paca[i].kexec_state < wait_state) {
barrier();
if (!cpu_possible(i)) {
printk("kexec: cpu %d hw_cpu_id %d is not"
@@ -226,20 +231,35 @@ static void kexec_prepare_cpus(void)
}
if (i != notified) {
printk( "kexec: waiting for cpu %d (physical"
- " %d) to go down\n",
- i, paca[i].hw_cpu_id);
+ " %d) to enter %i state\n",
+ i, paca[i].hw_cpu_id, wait_state);
notified = i;
}
}
}
+ mb();
+}
+
+static void kexec_prepare_cpus(void)
+{
+
+ smp_call_function(kexec_smp_down, NULL, /* wait */0);
+ local_irq_disable();
+ mb(); /* make sure IRQs are disabled before we say they are */
+ get_paca()->kexec_state = KEXEC_STATE_IRQS_OFF;
+
+ kexec_prepare_cpus_wait(KEXEC_STATE_IRQS_OFF);
+ /* we are sure every CPU has IRQs off at this point */
+ kexec_all_irq_disabled = 1;
/* after we tell the others to go down */
if (ppc_md.kexec_cpu_down)
ppc_md.kexec_cpu_down(0, 0);
- put_cpu();
+/* Before removing MMU mapings make sure all CPUs have entered real mode */
+ kexec_prepare_cpus_wait(KEXEC_STATE_REAL_MODE);
- local_irq_disable();
+ put_cpu();
}
#else /* ! SMP */
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -24,6 +24,7 @@
#include <asm/asm-offsets.h>
#include <asm/cputable.h>
#include <asm/thread_info.h>
+#include <asm/kexec.h>
.text
@@ -471,6 +472,10 @@ _GLOBAL(kexec_wait)
1: mflr r5
addi r5,r5,kexec_flag-1b
+ li r4,KEXEC_STATE_REAL_MODE
+ stb r4,PACAKEXECSTATE(r13)
+ SYNC
+
99: HMT_LOW
#ifdef CONFIG_KEXEC /* use no memory without kexec */
lwz r4,0(r5)
@@ -494,14 +499,11 @@ kexec_flag:
* note: this is a terminal routine, it does not save lr
*
* get phys id from paca
- * set paca id to -1 to say we got here
* switch to real mode
* join other cpus in kexec_wait(phys_id)
*/
_GLOBAL(kexec_smp_wait)
lhz r3,PACAHWCPUID(r13)
- li r4,-1
- sth r4,PACAHWCPUID(r13) /* let others know we left */
bl real_mode
b .kexec_wait
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -14,6 +14,7 @@
#include <asm/paca.h>
#include <asm/sections.h>
#include <asm/pgtable.h>
+#include <asm/kexec.h>
/* This symbol is provided by the linker - let it fill in the paca
* field correctly */
@@ -97,6 +98,7 @@ void __init initialise_pacas(void)
new_paca->kernelbase = (unsigned long) _stext;
new_paca->kernel_msr = MSR_KERNEL;
new_paca->hw_cpu_id = 0xffff;
+ new_paca->kexec_state = KEXEC_STATE_NONE;
new_paca->__current = &init_task;
#ifdef CONFIG_PPC_STD_MMU_64
new_paca->slb_shadow_ptr = &slb_shadow[cpu];
--- a/arch/powerpc/kernel/perf_event.c
+++ b/arch/powerpc/kernel/perf_event.c
@@ -1220,6 +1220,28 @@ unsigned long perf_instruction_pointer(s
return ip;
}
+static bool pmc_overflow(unsigned long val)
+{
+ if ((int)val < 0)
+ return true;
+
+ /*
+ * Events on POWER7 can roll back if a speculative event doesn't
+ * eventually complete. Unfortunately in some rare cases they will
+ * raise a performance monitor exception. We need to catch this to
+ * ensure we reset the PMC. In all cases the PMC will be 256 or less
+ * cycles from overflow.
+ *
+ * We only do this if the first pass fails to find any overflowing
+ * PMCs because a user might set a period of less than 256 and we
+ * don't want to mistakenly reset them.
+ */
+ if (__is_processor(PV_POWER7) && ((0x80000000 - val) <= 256))
+ return true;
+
+ return false;
+}
+
/*
* Performance monitor interrupt stuff
*/
@@ -1267,7 +1289,7 @@ static void perf_event_interrupt(struct
if (is_limited_pmc(i + 1))
continue;
val = read_pmc(i + 1);
- if ((int)val < 0)
+ if (pmc_overflow(val))
write_pmc(i + 1, 0);
}
}
--- a/arch/powerpc/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -93,12 +93,8 @@ struct flash_block_list {
struct flash_block_list *next;
struct flash_block blocks[FLASH_BLOCKS_PER_NODE];
};
-struct flash_block_list_header { /* just the header of flash_block_list */
- unsigned long num_blocks;
- struct flash_block_list *next;
-};
-static struct flash_block_list_header rtas_firmware_flash_list = {0, NULL};
+static struct flash_block_list *rtas_firmware_flash_list;
/* Use slab cache to guarantee 4k alignment */
static struct kmem_cache *flash_block_cache = NULL;
@@ -107,13 +103,14 @@ static struct kmem_cache *flash_block_ca
/* Local copy of the flash block list.
* We only allow one open of the flash proc file and create this
- * list as we go. This list will be put in the
- * rtas_firmware_flash_list var once it is fully read.
+ * list as we go. The rtas_firmware_flash_list varable will be
+ * set once the data is fully read.
*
* For convenience as we build the list we use virtual addrs,
* we do not fill in the version number, and the length field
* is treated as the number of entries currently in the block
- * (i.e. not a byte count). This is all fixed on release.
+ * (i.e. not a byte count). This is all fixed when calling
+ * the flash routine.
*/
/* Status int must be first member of struct */
@@ -200,16 +197,16 @@ static int rtas_flash_release(struct ino
if (uf->flist) {
/* File was opened in write mode for a new flash attempt */
/* Clear saved list */
- if (rtas_firmware_flash_list.next) {
- free_flash_list(rtas_firmware_flash_list.next);
- rtas_firmware_flash_list.next = NULL;
+ if (rtas_firmware_flash_list) {
+ free_flash_list(rtas_firmware_flash_list);
+ rtas_firmware_flash_list = NULL;
}
if (uf->status != FLASH_AUTH)
uf->status = flash_list_valid(uf->flist);
if (uf->status == FLASH_IMG_READY)
- rtas_firmware_flash_list.next = uf->flist;
+ rtas_firmware_flash_list = uf->flist;
else
free_flash_list(uf->flist);
@@ -592,7 +589,7 @@ static void rtas_flash_firmware(int rebo
unsigned long rtas_block_list;
int i, status, update_token;
- if (rtas_firmware_flash_list.next == NULL)
+ if (rtas_firmware_flash_list == NULL)
return; /* nothing to do */
if (reboot_type != SYS_RESTART) {
@@ -609,20 +606,25 @@ static void rtas_flash_firmware(int rebo
return;
}
- /* NOTE: the "first" block list is a global var with no data
- * blocks in the kernel data segment. We do this because
- * we want to ensure this block_list addr is under 4GB.
+ /*
+ * NOTE: the "first" block must be under 4GB, so we create
+ * an entry with no data blocks in the reserved buffer in
+ * the kernel data segment.
*/
- rtas_firmware_flash_list.num_blocks = 0;
- flist = (struct flash_block_list *)&rtas_firmware_flash_list;
+ spin_lock(&rtas_data_buf_lock);
+ flist = (struct flash_block_list *)&rtas_data_buf[0];
+ flist->num_blocks = 0;
+ flist->next = rtas_firmware_flash_list;
rtas_block_list = virt_to_abs(flist);
if (rtas_block_list >= 4UL*1024*1024*1024) {
printk(KERN_ALERT "FLASH: kernel bug...flash list header addr above 4GB\n");
+ spin_unlock(&rtas_data_buf_lock);
return;
}
printk(KERN_ALERT "FLASH: preparing saved firmware image for flash\n");
/* Update the block_list in place. */
+ rtas_firmware_flash_list = NULL; /* too hard to backout on error */
image_size = 0;
for (f = flist; f; f = next) {
/* Translate data addrs to absolute */
@@ -663,6 +665,7 @@ static void rtas_flash_firmware(int rebo
printk(KERN_ALERT "FLASH: unknown flash return code %d\n", status);
break;
}
+ spin_unlock(&rtas_data_buf_lock);
}
static void remove_flash_pde(struct proc_dir_entry *dp)
--- a/arch/x86/include/asm/pgtable-3level.h
+++ b/arch/x86/include/asm/pgtable-3level.h
@@ -69,8 +69,6 @@ static inline void native_pmd_clear(pmd_
static inline void pud_clear(pud_t *pudp)
{
- unsigned long pgd;
-
set_pud(pudp, __pud(0));
/*
@@ -79,13 +77,10 @@ static inline void pud_clear(pud_t *pudp
* section 8.1: in PAE mode we explicitly have to flush the
* TLB via cr3 if the top-level pgd is changed...
*
- * Make sure the pud entry we're updating is within the
- * current pgd to avoid unnecessary TLB flushes.
+ * Currently all places where pud_clear() is called either have
+ * flush_tlb_mm() followed or don't need TLB flush (x86_64 code or
+ * pud_clear_bad()), so we don't need TLB flush here.
*/
- pgd = read_cr3();
- if (__pa(pudp) >= pgd && __pa(pudp) <
- (pgd + sizeof(pgd_t)*PTRS_PER_PGD))
- write_cr3(pgd);
}
#ifdef CONFIG_SMP
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -1236,15 +1236,21 @@ static int __init parse_memopt(char *p)
if (!p)
return -EINVAL;
-#ifdef CONFIG_X86_32
if (!strcmp(p, "nopentium")) {
+#ifdef CONFIG_X86_32
setup_clear_cpu_cap(X86_FEATURE_PSE);
return 0;
- }
+#else
+ printk(KERN_WARNING "mem=nopentium ignored! (only supported on x86_32)\n");
+ return -EINVAL;
#endif
+ }
userdef = 1;
mem_size = memparse(p, &p);
+ /* don't remove all of memory when handling "mem={invalid}" param */
+ if (mem_size == 0)
+ return -EINVAL;
e820_remove_range(mem_size, ULLONG_MAX - mem_size, E820_RAM, 1);
return 0;
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -161,7 +161,12 @@ static void __init ati_bugs_contd(int nu
if (rev >= 0x40)
acpi_fix_pin2_polarity = 1;
- if (rev > 0x13)
+ /*
+ * SB600: revisions 0x11, 0x12, 0x13, 0x14, ...
+ * SB700: revisions 0x39, 0x3a, ...
+ * SB800: revisions 0x40, 0x41, ...
+ */
+ if (rev >= 0x39)
return;
if (acpi_use_timer_override)
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -1303,7 +1303,7 @@ ENTRY(xen_do_hypervisor_callback) # do
decl PER_CPU_VAR(irq_count)
jmp error_exit
CFI_ENDPROC
-END(do_hypervisor_callback)
+END(xen_do_hypervisor_callback)
/*
* Hypervisor uses this for application faults while it executes.
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -830,6 +830,13 @@ mm_fault_error(struct pt_regs *regs, uns
unsigned long address, unsigned int fault)
{
if (fault & VM_FAULT_OOM) {
+ /* Kernel mode? Handle exceptions or die: */
+ if (!(error_code & PF_USER)) {
+ up_read(¤t->mm->mmap_sem);
+ no_context(regs, error_code, address);
+ return;
+ }
+
out_of_memory(regs, error_code, address);
} else {
if (fault & (VM_FAULT_SIGBUS|VM_FAULT_HWPOISON))
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -159,8 +159,7 @@ void pud_populate(struct mm_struct *mm,
* section 8.1: in PAE mode we explicitly have to flush the
* TLB via cr3 if the top-level pgd is changed...
*/
- if (mm == current->active_mm)
- write_cr3(read_cr3());
+ flush_tlb_mm(mm);
}
#else /* !CONFIG_X86_PAE */
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -576,6 +576,11 @@ static const struct pci_device_id ahci_p
{ PCI_VDEVICE(INTEL, 0x1c05), board_ahci }, /* CPT RAID */
{ PCI_VDEVICE(INTEL, 0x1c06), board_ahci }, /* CPT RAID */
{ PCI_VDEVICE(INTEL, 0x1c07), board_ahci }, /* CPT RAID */
+ { PCI_VDEVICE(INTEL, 0x1d02), board_ahci }, /* PBG AHCI */
+ { PCI_VDEVICE(INTEL, 0x1d04), board_ahci }, /* PBG RAID */
+ { PCI_VDEVICE(INTEL, 0x1d06), board_ahci }, /* PBG RAID */
+ { PCI_VDEVICE(INTEL, 0x2826), board_ahci }, /* PBG RAID */
+ { PCI_VDEVICE(INTEL, 0x2323), board_ahci }, /* DH89xxCC AHCI */
/* JMicron 360/1/3/5/6, match class to avoid IDE function */
{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5016,9 +5016,6 @@ static void ata_verify_xfer(struct ata_q
{
struct ata_device *dev = qc->dev;
- if (ata_tag_internal(qc->tag))
- return;
-
if (ata_is_nodata(qc->tf.protocol))
return;
@@ -5062,14 +5059,23 @@ void ata_qc_complete(struct ata_queued_c
if (unlikely(qc->err_mask))
qc->flags |= ATA_QCFLAG_FAILED;
- if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) {
- /* always fill result TF for failed qc */
+ /*
+ * Finish internal commands without any further processing
+ * and always with the result TF filled.
+ */
+ if (unlikely(ata_tag_internal(qc->tag))) {
fill_result_tf(qc);
+ __ata_qc_complete(qc);
+ return;
+ }
- if (!ata_tag_internal(qc->tag))
- ata_qc_schedule_eh(qc);
- else
- __ata_qc_complete(qc);
+ /*
+ * Non-internal qc has failed. Fill the result TF and
+ * summon EH.
+ */
+ if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) {
+ fill_result_tf(qc);
+ ata_qc_schedule_eh(qc);
return;
}
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -1957,7 +1957,6 @@ static int f71882fg_remove(struct platfo
int i;
struct f71882fg_data *data = platform_get_drvdata(pdev);
- platform_set_drvdata(pdev, NULL);
if (data->hwmon_dev)
hwmon_device_unregister(data->hwmon_dev);
@@ -1982,6 +1981,7 @@ static int f71882fg_remove(struct platfo
for (i = 0; i < ARRAY_SIZE(f8000_fan_attr); i++)
device_remove_file(&pdev->dev, &f8000_fan_attr[i].dev_attr);
+ platform_set_drvdata(pdev, NULL);
kfree(data);
return 0;
--- a/drivers/hwmon/sht15.c
+++ b/drivers/hwmon/sht15.c
@@ -332,11 +332,11 @@ static inline int sht15_calc_humid(struc
const int c1 = -4;
const int c2 = 40500; /* x 10 ^ -6 */
- const int c3 = -2800; /* x10 ^ -9 */
+ const int c3 = -28; /* x 10 ^ -7 */
RHlinear = c1*1000
+ c2 * data->val_humid/1000
- + (data->val_humid * data->val_humid * c3)/1000000;
+ + (data->val_humid * data->val_humid * c3) / 10000;
return (temp - 25000) * (10000 + 80 * data->val_humid)
/ 1000000 + RHlinear;
}
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -2986,6 +2986,7 @@ static int cm_sidr_req_handler(struct cm
goto out; /* No match. */
}
atomic_inc(&cur_cm_id_priv->refcount);
+ atomic_inc(&cm_id_priv->refcount);
spin_unlock_irq(&cm.lock);
cm_id_priv->id.cm_handler = cur_cm_id_priv->id.cm_handler;
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -1138,6 +1138,11 @@ static int cma_req_handler(struct ib_cm_
cm_id->context = conn_id;
cm_id->cm_handler = cma_ib_handler;
+ /*
+ * Protect against the user destroying conn_id from another thread
+ * until we're done accessing it.
+ */
+ atomic_inc(&conn_id->refcount);
ret = conn_id->id.event_handler(&conn_id->id, &event);
if (!ret) {
/*
@@ -1150,8 +1155,10 @@ static int cma_req_handler(struct ib_cm_
ib_send_cm_mra(cm_id, CMA_CM_MRA_SETTING, NULL, 0);
mutex_unlock(&lock);
mutex_unlock(&conn_id->handler_mutex);
+ cma_deref_id(conn_id);
goto out;
}
+ cma_deref_id(conn_id);
/* Destroy the CM ID by returning a non-zero value. */
conn_id->cm_id.ib = NULL;
@@ -1353,17 +1360,25 @@ static int iw_conn_req_handler(struct iw
event.param.conn.private_data_len = iw_event->private_data_len;
event.param.conn.initiator_depth = attr.max_qp_init_rd_atom;
event.param.conn.responder_resources = attr.max_qp_rd_atom;
+
+ /*
+ * Protect against the user destroying conn_id from another thread
+ * until we're done accessing it.
+ */
+ atomic_inc(&conn_id->refcount);
ret = conn_id->id.event_handler(&conn_id->id, &event);
if (ret) {
/* User wants to destroy the CM ID */
conn_id->cm_id.iw = NULL;
cma_exch(conn_id, CMA_DESTROYING);
mutex_unlock(&conn_id->handler_mutex);
+ cma_deref_id(conn_id);
rdma_destroy_id(&conn_id->id);
goto out;
}
mutex_unlock(&conn_id->handler_mutex);
+ cma_deref_id(conn_id);
out:
if (dev)
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -2635,12 +2635,6 @@ isdn_tty_modem_result(int code, modem_in
if ((info->flags & ISDN_ASYNC_CLOSING) || (!info->tty)) {
return;
}
-#ifdef CONFIG_ISDN_AUDIO
- if ( !info->vonline )
- tty_ldisc_flush(info->tty);
-#else
- tty_ldisc_flush(info->tty);
-#endif
if ((info->flags & ISDN_ASYNC_CHECK_CD) &&
(!((info->flags & ISDN_ASYNC_CALLOUT_ACTIVE) &&
(info->flags & ISDN_ASYNC_CALLOUT_NOHUP)))) {
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -278,6 +278,14 @@ static int mmc_sdio_init_card(struct mmc
if (err)
goto remove;
+ /*
+ * Update oldcard with the new RCA received from the SDIO
+ * device -- we're doing this so that it's updated in the
+ * "card" struct when oldcard overwrites that later.
+ */
+ if (oldcard)
+ oldcard->rca = card->rca;
+
mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
}
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -1099,6 +1099,6 @@ static void __exit omap_nand_exit(void)
module_init(omap_nand_init);
module_exit(omap_nand_exit);
-MODULE_ALIAS(DRIVER_NAME);
+MODULE_ALIAS("platform:" DRIVER_NAME);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Glue layer for NAND flash on TI OMAP boards");
--- a/drivers/mtd/onenand/generic.c
+++ b/drivers/mtd/onenand/generic.c
@@ -131,7 +131,7 @@ static struct platform_driver generic_on
.remove = __devexit_p(generic_onenand_remove),
};
-MODULE_ALIAS(DRIVER_NAME);
+MODULE_ALIAS("platform:" DRIVER_NAME);
static int __init generic_onenand_init(void)
{
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -800,7 +800,7 @@ static void __exit omap2_onenand_exit(vo
module_init(omap2_onenand_init);
module_exit(omap2_onenand_exit);
-MODULE_ALIAS(DRIVER_NAME);
+MODULE_ALIAS("platform:" DRIVER_NAME);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Jarkko Lavinen <jarkko.lavinen@nokia.com>");
MODULE_DESCRIPTION("Glue layer for OneNAND flash on OMAP2 / OMAP3");
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -917,6 +917,8 @@ int ath9k_hw_init(struct ath_hw *ah)
ath9k_hw_init_defaults(ah);
ath9k_hw_init_config(ah);
+ ath9k_hw_read_revisions(ah);
+
if (!ath9k_hw_set_reset_reg(ah, ATH9K_RESET_POWER_ON)) {
DPRINTF(ah->ah_sc, ATH_DBG_FATAL, "Couldn't reset chip\n");
return -EIO;
@@ -1758,8 +1760,6 @@ static bool ath9k_hw_set_reset_power_on(
return false;
}
- ath9k_hw_read_revisions(ah);
-
return ath9k_hw_set_reset(ah, ATH9K_RESET_WARM);
}
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -962,7 +962,7 @@ static int pci_create_capabilities_sysfs
attr->write = write_vpd_attr;
retval = sysfs_create_bin_file(&dev->dev.kobj, attr);
if (retval) {
- kfree(dev->vpd->attr);
+ kfree(attr);
return retval;
}
dev->vpd->attr = attr;
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -506,6 +506,17 @@ static void __devinit quirk_piix4_acpi(s
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, quirk_piix4_acpi);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3, quirk_piix4_acpi);
+#define ICH_PMBASE 0x40
+#define ICH_ACPI_CNTL 0x44
+#define ICH4_ACPI_EN 0x10
+#define ICH6_ACPI_EN 0x80
+#define ICH4_GPIOBASE 0x58
+#define ICH4_GPIO_CNTL 0x5c
+#define ICH4_GPIO_EN 0x10
+#define ICH6_GPIOBASE 0x48
+#define ICH6_GPIO_CNTL 0x4c
+#define ICH6_GPIO_EN 0x10
+
/*
* ICH4, ICH4-M, ICH5, ICH5-M ACPI: Three IO regions pointed to by longwords at
* 0x40 (128 bytes of ACPI, GPIO & TCO registers)
@@ -514,12 +525,33 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
static void __devinit quirk_ich4_lpc_acpi(struct pci_dev *dev)
{
u32 region;
+ u8 enable;
- pci_read_config_dword(dev, 0x40, ®ion);
- quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES, "ICH4 ACPI/GPIO/TCO");
+ /*
+ * The check for PCIBIOS_MIN_IO is to ensure we won't create a conflict
+ * with low legacy (and fixed) ports. We don't know the decoding
+ * priority and can't tell whether the legacy device or the one created
+ * here is really at that address. This happens on boards with broken
+ * BIOSes.
+ */
+
+ pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable);
+ if (enable & ICH4_ACPI_EN) {
+ pci_read_config_dword(dev, ICH_PMBASE, ®ion);
+ region &= PCI_BASE_ADDRESS_IO_MASK;
+ if (region >= PCIBIOS_MIN_IO)
+ quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES,
+ "ICH4 ACPI/GPIO/TCO");
+ }
- pci_read_config_dword(dev, 0x58, ®ion);
- quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1, "ICH4 GPIO");
+ pci_read_config_byte(dev, ICH4_GPIO_CNTL, &enable);
+ if (enable & ICH4_GPIO_EN) {
+ pci_read_config_dword(dev, ICH4_GPIOBASE, ®ion);
+ region &= PCI_BASE_ADDRESS_IO_MASK;
+ if (region >= PCIBIOS_MIN_IO)
+ quirk_io_region(dev, region, 64,
+ PCI_BRIDGE_RESOURCES + 1, "ICH4 GPIO");
+ }
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, quirk_ich4_lpc_acpi);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, quirk_ich4_lpc_acpi);
@@ -535,12 +567,25 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
static void __devinit ich6_lpc_acpi_gpio(struct pci_dev *dev)
{
u32 region;
+ u8 enable;
- pci_read_config_dword(dev, 0x40, ®ion);
- quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES, "ICH6 ACPI/GPIO/TCO");
+ pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable);
+ if (enable & ICH6_ACPI_EN) {
+ pci_read_config_dword(dev, ICH_PMBASE, ®ion);
+ region &= PCI_BASE_ADDRESS_IO_MASK;
+ if (region >= PCIBIOS_MIN_IO)
+ quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES,
+ "ICH6 ACPI/GPIO/TCO");
+ }
- pci_read_config_dword(dev, 0x48, ®ion);
- quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1, "ICH6 GPIO");
+ pci_read_config_byte(dev, ICH6_GPIO_CNTL, &enable);
+ if (enable & ICH4_GPIO_EN) {
+ pci_read_config_dword(dev, ICH6_GPIOBASE, ®ion);
+ region &= PCI_BASE_ADDRESS_IO_MASK;
+ if (region >= PCIBIOS_MIN_IO)
+ quirk_io_region(dev, region, 64,
+ PCI_BRIDGE_RESOURCES + 1, "ICH6 GPIO");
+ }
}
static void __devinit ich6_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name, int dynsize)
@@ -2495,58 +2540,6 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AT
#endif /* CONFIG_PCI_MSI */
-#ifdef CONFIG_PCI_IOV
-
-/*
- * For Intel 82576 SR-IOV NIC, if BIOS doesn't allocate resources for the
- * SR-IOV BARs, zero the Flash BAR and program the SR-IOV BARs to use the
- * old Flash Memory Space.
- */
-static void __devinit quirk_i82576_sriov(struct pci_dev *dev)
-{
- int pos, flags;
- u32 bar, start, size;
-
- if (PAGE_SIZE > 0x10000)
- return;
-
- flags = pci_resource_flags(dev, 0);
- if ((flags & PCI_BASE_ADDRESS_SPACE) !=
- PCI_BASE_ADDRESS_SPACE_MEMORY ||
- (flags & PCI_BASE_ADDRESS_MEM_TYPE_MASK) !=
- PCI_BASE_ADDRESS_MEM_TYPE_32)
- return;
-
- pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV);
- if (!pos)
- return;
-
- pci_read_config_dword(dev, pos + PCI_SRIOV_BAR, &bar);
- if (bar & PCI_BASE_ADDRESS_MEM_MASK)
- return;
-
- start = pci_resource_start(dev, 1);
- size = pci_resource_len(dev, 1);
- if (!start || size != 0x400000 || start & (size - 1))
- return;
-
- pci_resource_flags(dev, 1) = 0;
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0);
- pci_write_config_dword(dev, pos + PCI_SRIOV_BAR, start);
- pci_write_config_dword(dev, pos + PCI_SRIOV_BAR + 12, start + size / 2);
-
- dev_info(&dev->dev, "use Flash Memory Space for SR-IOV BARs\n");
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x10c9, quirk_i82576_sriov);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x10e6, quirk_i82576_sriov);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x10e7, quirk_i82576_sriov);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x10e8, quirk_i82576_sriov);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x150a, quirk_i82576_sriov);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x150d, quirk_i82576_sriov);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1518, quirk_i82576_sriov);
-
-#endif /* CONFIG_PCI_IOV */
-
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
struct pci_fixup *end)
{
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -417,6 +417,20 @@ void xhci_find_new_dequeue_state(struct
state->new_cycle_state = ~(state->new_cycle_state) & 0x1;
next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr);
+ /*
+ * If there is only one segment in a ring, find_trb_seg()'s while loop
+ * will not run, and it will return before it has a chance to see if it
+ * needs to toggle the cycle bit. It can't tell if the stalled transfer
+ * ended just before the link TRB on a one-segment ring, or if the TD
+ * wrapped around the top of the ring, because it doesn't have the TD in
+ * question. Look for the one-segment case where stalled TRB's address
+ * is greater than the new dequeue pointer address.
+ */
+ if (ep_ring->first_seg == ep_ring->first_seg->next &&
+ state->new_deq_ptr < dev->eps[ep_index].stopped_trb)
+ state->new_cycle_state ^= 0x1;
+ xhci_dbg(xhci, "Cycle state = 0x%x\n", state->new_cycle_state);
+
/* Don't update the ring cycle state for the producer (us). */
xhci_dbg(xhci, "New dequeue segment = %p (virtual)\n",
state->new_deq_seg);
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -73,6 +73,7 @@ static int debug;
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x4348, 0x5523) },
{ USB_DEVICE(0x1a86, 0x7523) },
+ { USB_DEVICE(0x1a86, 0x5523) },
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -372,7 +372,7 @@ static void kobil_read_int_callback(stru
}
tty = tty_port_tty_get(&port->port);
- if (urb->actual_length) {
+ if (tty && urb->actual_length) {
/* BEGIN DEBUG */
/*
--- a/fs/ext3/namei.c
+++ b/fs/ext3/namei.c
@@ -1550,8 +1550,8 @@ static int ext3_dx_add_entry(handle_t *h
goto cleanup;
node2 = (struct dx_node *)(bh2->b_data);
entries2 = node2->entries;
+ memset(&node2->fake, 0, sizeof(struct fake_dirent));
node2->fake.rec_len = ext3_rec_len_to_disk(sb->s_blocksize);
- node2->fake.inode = 0;
BUFFER_TRACE(frame->bh, "get_write_access");
err = ext3_journal_get_write_access(handle, frame->bh);
if (err)
--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -412,6 +412,7 @@ extern void unregister_ftrace_graph(void
extern void ftrace_graph_init_task(struct task_struct *t);
extern void ftrace_graph_exit_task(struct task_struct *t);
+extern void ftrace_graph_init_idle_task(struct task_struct *t, int cpu);
static inline int task_curr_ret_stack(struct task_struct *t)
{
@@ -435,6 +436,7 @@ static inline void unpause_graph_tracing
static inline void ftrace_graph_init_task(struct task_struct *t) { }
static inline void ftrace_graph_exit_task(struct task_struct *t) { }
+static inline void ftrace_graph_init_idle_task(struct task_struct *t, int cpu) { }
static inline int task_curr_ret_stack(struct task_struct *tsk)
{
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -7300,7 +7300,7 @@ void __cpuinit init_idle(struct task_str
* The idle tasks have their own, simple scheduling class:
*/
idle->sched_class = &idle_sched_class;
- ftrace_graph_init_task(idle);
+ ftrace_graph_init_idle_task(idle, cpu);
}
/*
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -388,7 +388,7 @@ void smp_call_function_many(const struct
{
struct call_function_data *data;
unsigned long flags;
- int cpu, next_cpu, this_cpu = smp_processor_id();
+ int refs, cpu, next_cpu, this_cpu = smp_processor_id();
/*
* Can deadlock when called with interrupts disabled.
@@ -399,7 +399,7 @@ void smp_call_function_many(const struct
WARN_ON_ONCE(cpu_online(this_cpu) && irqs_disabled()
&& !oops_in_progress);
- /* So, what's a CPU they want? Ignoring this one. */
+ /* Try to fastpath. So, what's a CPU they want? Ignoring this one. */
cpu = cpumask_first_and(mask, cpu_online_mask);
if (cpu == this_cpu)
cpu = cpumask_next_and(cpu, mask, cpu_online_mask);
@@ -421,22 +421,49 @@ void smp_call_function_many(const struct
data = &__get_cpu_var(cfd_data);
csd_lock(&data->csd);
+
+ /* This BUG_ON verifies our reuse assertions and can be removed */
BUG_ON(atomic_read(&data->refs) || !cpumask_empty(data->cpumask));
+ /*
+ * The global call function queue list add and delete are protected
+ * by a lock, but the list is traversed without any lock, relying
+ * on the rcu list add and delete to allow safe concurrent traversal.
+ * We reuse the call function data without waiting for any grace
+ * period after some other cpu removes it from the global queue.
+ * This means a cpu might find our data block as it is being
+ * filled out.
+ *
+ * We hold off the interrupt handler on the other cpu by
+ * ordering our writes to the cpu mask vs our setting of the
+ * refs counter. We assert only the cpu owning the data block
+ * will set a bit in cpumask, and each bit will only be cleared
+ * by the subject cpu. Each cpu must first find its bit is
+ * set and then check that refs is set indicating the element is
+ * ready to be processed, otherwise it must skip the entry.
+ *
+ * On the previous iteration refs was set to 0 by another cpu.
+ * To avoid the use of transitivity, set the counter to 0 here
+ * so the wmb will pair with the rmb in the interrupt handler.
+ */
+ atomic_set(&data->refs, 0); /* convert 3rd to 1st party write */
+
data->csd.func = func;
data->csd.info = info;
- cpumask_and(data->cpumask, mask, cpu_online_mask);
- cpumask_clear_cpu(this_cpu, data->cpumask);
- /*
- * To ensure the interrupt handler gets an complete view
- * we order the cpumask and refs writes and order the read
- * of them in the interrupt handler. In addition we may
- * only clear our own cpu bit from the mask.
- */
+ /* Ensure 0 refs is visible before mask. Also orders func and info */
smp_wmb();
- atomic_set(&data->refs, cpumask_weight(data->cpumask));
+ /* We rely on the "and" being processed before the store */
+ cpumask_and(data->cpumask, mask, cpu_online_mask);
+ cpumask_clear_cpu(this_cpu, data->cpumask);
+ refs = cpumask_weight(data->cpumask);
+
+ /* Some callers race with other cpus changing the passed mask */
+ if (unlikely(!refs)) {
+ csd_unlock(&data->csd);
+ return;
+ }
spin_lock_irqsave(&call_function.lock, flags);
/*
@@ -445,6 +472,12 @@ void smp_call_function_many(const struct
* will not miss any other list entries:
*/
list_add_rcu(&data->csd.list, &call_function.queue);
+ /*
+ * We rely on the wmb() in list_add_rcu to complete our writes
+ * to the cpumask before this write to refs, which indicates
+ * data is on the list and is ready to be processed.
+ */
+ atomic_set(&data->refs, refs);
spin_unlock_irqrestore(&call_function.lock, flags);
/*
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -3172,7 +3172,7 @@ static int start_graph_tracing(void)
/* The cpu_boot init_task->ret_stack will never be freed */
for_each_online_cpu(cpu) {
if (!idle_task(cpu)->ret_stack)
- ftrace_graph_init_task(idle_task(cpu));
+ ftrace_graph_init_idle_task(idle_task(cpu), cpu);
}
do {
@@ -3262,6 +3262,49 @@ void unregister_ftrace_graph(void)
mutex_unlock(&ftrace_lock);
}
+static DEFINE_PER_CPU(struct ftrace_ret_stack *, idle_ret_stack);
+
+static void
+graph_init_task(struct task_struct *t, struct ftrace_ret_stack *ret_stack)
+{
+ atomic_set(&t->tracing_graph_pause, 0);
+ atomic_set(&t->trace_overrun, 0);
+ t->ftrace_timestamp = 0;
+ /* make curr_ret_stack visable before we add the ret_stack */
+ smp_wmb();
+ t->ret_stack = ret_stack;
+}
+
+/*
+ * Allocate a return stack for the idle task. May be the first
+ * time through, or it may be done by CPU hotplug online.
+ */
+void ftrace_graph_init_idle_task(struct task_struct *t, int cpu)
+{
+ t->curr_ret_stack = -1;
+ /*
+ * The idle task has no parent, it either has its own
+ * stack or no stack at all.
+ */
+ if (t->ret_stack)
+ WARN_ON(t->ret_stack != per_cpu(idle_ret_stack, cpu));
+
+ if (ftrace_graph_active) {
+ struct ftrace_ret_stack *ret_stack;
+
+ ret_stack = per_cpu(idle_ret_stack, cpu);
+ if (!ret_stack) {
+ ret_stack = kmalloc(FTRACE_RETFUNC_DEPTH
+ * sizeof(struct ftrace_ret_stack),
+ GFP_KERNEL);
+ if (!ret_stack)
+ return;
+ per_cpu(idle_ret_stack, cpu) = ret_stack;
+ }
+ graph_init_task(t, ret_stack);
+ }
+}
+
/* Allocate a return stack for newly created task */
void ftrace_graph_init_task(struct task_struct *t)
{
@@ -3277,12 +3320,7 @@ void ftrace_graph_init_task(struct task_
GFP_KERNEL);
if (!ret_stack)
return;
- atomic_set(&t->tracing_graph_pause, 0);
- atomic_set(&t->trace_overrun, 0);
- t->ftrace_timestamp = 0;
- /* make curr_ret_stack visable before we add the ret_stack */
- smp_wmb();
- t->ret_stack = ret_stack;
+ graph_init_task(t, ret_stack);
}
}
--- a/net/sunrpc/sched.c
+++ b/net/sunrpc/sched.c
@@ -627,14 +627,12 @@ static void __rpc_execute(struct rpc_tas
save_callback = task->tk_callback;
task->tk_callback = NULL;
save_callback(task);
- }
-
- /*
- * Perform the next FSM step.
- * tk_action may be NULL when the task has been killed
- * by someone else.
- */
- if (!RPC_IS_QUEUED(task)) {
+ } else {
+ /*
+ * Perform the next FSM step.
+ * tk_action may be NULL when the task has been killed
+ * by someone else.
+ */
if (task->tk_action == NULL)
break;
task->tk_action(task);
--- a/sound/pci/ctxfi/ctatc.c
+++ b/sound/pci/ctxfi/ctatc.c
@@ -868,7 +868,7 @@ spdif_passthru_playback_setup(struct ct_
mutex_lock(&atc->atc_mutex);
dao->ops->get_spos(dao, &status);
if (((status >> 24) & IEC958_AES3_CON_FS) != iec958_con_fs) {
- status &= ((~IEC958_AES3_CON_FS) << 24);
+ status &= ~(IEC958_AES3_CON_FS << 24);
status |= (iec958_con_fs << 24);
dao->ops->set_spos(dao, status);
dao->ops->commit_write(dao);
--- a/sound/pci/ctxfi/ctdaio.c
+++ b/sound/pci/ctxfi/ctdaio.c
@@ -176,6 +176,7 @@ static int dao_set_left_input(struct dao
if (!entry)
return -ENOMEM;
+ dao->ops->clear_left_input(dao);
/* Program master and conjugate resources */
input->ops->master(input);
daio->rscl.ops->master(&daio->rscl);
@@ -204,6 +205,7 @@ static int dao_set_right_input(struct da
if (!entry)
return -ENOMEM;
+ dao->ops->clear_right_input(dao);
/* Program master and conjugate resources */
input->ops->master(input);
daio->rscr.ops->master(&daio->rscr);
--- a/sound/pci/ctxfi/ctmixer.c
+++ b/sound/pci/ctxfi/ctmixer.c
@@ -566,19 +566,6 @@ static int ct_spdif_get_mask(struct snd_
return 0;
}
-static int ct_spdif_default_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- unsigned int status = SNDRV_PCM_DEFAULT_CON_SPDIF;
-
- ucontrol->value.iec958.status[0] = (status >> 0) & 0xff;
- ucontrol->value.iec958.status[1] = (status >> 8) & 0xff;
- ucontrol->value.iec958.status[2] = (status >> 16) & 0xff;
- ucontrol->value.iec958.status[3] = (status >> 24) & 0xff;
-
- return 0;
-}
-
static int ct_spdif_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
@@ -586,6 +573,10 @@ static int ct_spdif_get(struct snd_kcont
unsigned int status;
atc->spdif_out_get_status(atc, &status);
+
+ if (status == 0)
+ status = SNDRV_PCM_DEFAULT_CON_SPDIF;
+
ucontrol->value.iec958.status[0] = (status >> 0) & 0xff;
ucontrol->value.iec958.status[1] = (status >> 8) & 0xff;
ucontrol->value.iec958.status[2] = (status >> 16) & 0xff;
@@ -629,7 +620,7 @@ static struct snd_kcontrol_new iec958_de
.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT),
.count = 1,
.info = ct_spdif_info,
- .get = ct_spdif_default_get,
+ .get = ct_spdif_get,
.put = ct_spdif_put,
.private_value = MIXER_IEC958_DEFAULT
};
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -727,7 +727,7 @@ static int stac92xx_mux_enum_put(struct
struct sigmatel_spec *spec = codec->spec;
unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
const struct hda_input_mux *imux = spec->input_mux;
- unsigned int idx, prev_idx;
+ unsigned int idx, prev_idx, didx;
idx = ucontrol->value.enumerated.item[0];
if (idx >= imux->num_items)
@@ -739,7 +739,8 @@ static int stac92xx_mux_enum_put(struct
snd_hda_codec_write_cache(codec, spec->mux_nids[adc_idx], 0,
AC_VERB_SET_CONNECT_SEL,
imux->items[idx].index);
- if (prev_idx >= spec->num_analog_muxes) {
+ if (prev_idx >= spec->num_analog_muxes &&
+ spec->mux_nids[adc_idx] != spec->dmux_nids[adc_idx]) {
imux = spec->dinput_mux;
/* 0 = analog */
snd_hda_codec_write_cache(codec,
@@ -749,9 +750,13 @@ static int stac92xx_mux_enum_put(struct
}
} else {
imux = spec->dinput_mux;
+ /* first dimux item is hardcoded to select analog imux,
+ * so lets skip it
+ */
+ didx = idx - spec->num_analog_muxes + 1;
snd_hda_codec_write_cache(codec, spec->dmux_nids[adc_idx], 0,
AC_VERB_SET_CONNECT_SEL,
- imux->items[idx - 1].index);
+ imux->items[didx].index);
}
spec->cur_mux[adc_idx] = idx;
return 1;
projects / ziggy471-frankenstein-kernel.git / commitdiff