--- a/arch/arm/mach-msm/board-supersonic-panel.c

+++ b/arch/arm/mach-msm/board-supersonic-panel.c

@@ -35,13 +35,6 @@

#include "devices.h"

#include "proc_comm.h"

-/*

-** Innitial T2 Settings

-** Novatek Panels are picky, most start 50fps @ 372, the minority starts @ 378

-** So defaulting at 380, should support all. keyword: *should*

-*/

-int savedT2 = 380; // 380 default, should support around 53+fps for all Novatek Panels

-

#if 1

#define B(s...) printk(s)

#else

@@ -201,9 +194,6 @@ struct nov_regs {

{0x6A18, 0xff},

{0x6A17, 0x01},

{0xF402, 0x14},

-

- {0xb101, 0x01}, // T2 init - Put back in, just in case if T2 is defaulted,

- {0xb102, 0x7c}, // it gets defaulted to 380, and not 340. For Novatek Panels.

{0x3500, 0x00},

{0x1100, 0x0},

@@ -215,8 +205,8 @@ struct s1d_regs {

unsigned val;

} s1d13775_init_seq[] = {

{0x001C, 0x1500},

- {0x0020, 0x3047},

- {0x0024, 0x4014}, // original value 401A, last 5 bits set PLL clock div, 1A=27 div, 14 = ~53 fps, and is the sweet spot for a pure register epson fix - netarchy

+ {0x0020, 0x3043},

+ {0x0024, 0x401A},

{0x0028, 0x031A},

{0x002C, 0x0001},

{REG_WAIT, 0x0004}, /* increase delay 1ms -> 4ms */

@@ -226,7 +216,7 @@ struct s1d_regs {

{0x002C, 0x0002},

{REG_WAIT, 0x0004}, /* increase delay 1ms -> 4ms */

{0x002C, 0x0003},

- {0x0100, 0x3703}, // last 5 bits change pixel clock divider, 00011 (3) sets divider to 4, we like 4 combined with modded PLL clock div - netarchy

+ {0x0100, 0x3702},

{0x0104, 0x0180},

{0x0140, 0x003F},

{0x0144, 0x00EF},

@@ -250,7 +240,7 @@ struct s1d_regs {

{0x028C, 0x0001},

{0x0294, 0x0000},

{0x0400, 0x8000},

- {0x0404, 0x100F}, // original value 1001, Bits 0-9 set the Tearing Effect Delay (gets rid of tearing) - netarchy

+ {0x0404, 0x10C8},

{0x0480, 0x0001},

{0x0500, 0x0000},

{0x0504, 0x0011},

@@ -540,6 +530,17 @@ supersonic_mddi_init(struct msm_mddi_bri

unsigned reg, val;

if (panel_type == PANEL_SHARP) {

+ client_data->auto_hibernate(client_data, 0);

+ for (i = 0; i < ARRAY_SIZE(s1d13775_init_seq); i++) {

+ reg = s1d13775_init_seq[i].reg;

+ val = s1d13775_init_seq[i].val;

+ if (reg == REG_WAIT)

+ hr_msleep(val);

+ else

+ client_data->remote_write(client_data, cpu_to_le32(val), reg);

+ }

+ client_data->auto_hibernate(client_data, 1);

+

struct spi_cmd {

unsigned char reg;

unsigned char val;

@@ -556,16 +557,7 @@ supersonic_mddi_init(struct msm_mddi_bri

{0x1, 0x50, 0},

};

- client_data->auto_hibernate(client_data, 0);

- for (i = 0; i < ARRAY_SIZE(s1d13775_init_seq); i++) {

- reg = s1d13775_init_seq[i].reg;

- val = s1d13775_init_seq[i].val;

- if (reg == REG_WAIT)

- hr_msleep(val);

- else

- client_data->remote_write(client_data, cpu_to_le32(val), reg);

- }

- client_data->auto_hibernate(client_data, 1);

+ /* FIXME */

for (i = 0; i < ARRAY_SIZE(sharp_spi); i++) {

ret = qspi_send_9bit(sharp_spi[i].reg, sharp_spi[i].val);

@@ -657,25 +649,6 @@ static int

supersonic_panel_blank(struct msm_mddi_bridge_platform_data *bridge_data,

struct msm_mddi_client_data *client_data)

{

- /* For Novatek Panels Only */

- if (panel_type == 1)

- {

- /*

- ** Get the T2 value into readT2

- */

- unsigned readT2;

- readT2 = 0;

- readT2 |= client_data->remote_read(client_data, 0xb101) << 8;

- readT2 |= client_data->remote_read(client_data, 0xb102);

- /* readT2 value safety check */

- if (readT2 < 245 || readT2 > 999)

- {

- readT2 = 380;

- }

- savedT2 = readT2;

- }

- /* Done */

-

B(KERN_DEBUG "%s\n", __func__);

suc_backlight_switch(LED_OFF);

backlight_control(0);

@@ -689,39 +662,26 @@ supersonic_panel_unblank(struct msm_mddi

B(KERN_DEBUG "%s\n", __func__);

if (panel_type == PANEL_AUO) {

suc_backlight_switch(LED_FULL);

+ client_data->remote_write(client_data, 0x01, 0xB101);

+ client_data->remote_write(client_data, 0x82, 0xB102);

+ client_data->remote_write(client_data, 0x5A, 0xB107);

+ client_data->remote_write(client_data, 0x00, 0x4400);

+ client_data->remote_write(client_data, 0xC8, 0x4401);

client_data->remote_write(client_data, 0x00, 0x2900);

msleep(100);

client_data->remote_write(client_data, 0x24, 0x5300);

} else {

suc_backlight_switch(LED_FULL);

+ client_data->remote_write(client_data, 0x3043, 0x0020);

+ client_data->remote_write(client_data, 0x10C8, 0x0404);

client_data->remote_write(client_data, 0x4000, 0x0600);

msleep(10);

qspi_send_9bit(0x0, 0x29);

client_data->remote_write(client_data, 0x7000, 0x0324);

client_data->remote_write(client_data, 0x4000, 0x0600);

- client_data->remote_write(client_data, 0x100F, 0x0404); // Set anti-tearing on unblank for epson fix (including the intitial unblank at boot time) - netarchy

- client_data->remote_write(client_data, 0x3703, 0x0100); // Set Pixel Clock Divider to 4 on unblank

- client_data->remote_write(client_data, 0x4014, 0x0024); // Set PLL clock divider to 15 on unblank

}

backlight_control(1);

-

- /* For Novatek Panels Only */

- if (panel_type == 1)

- {

- /*

- ** Check saved value just to be safe

- */

- if (savedT2 < 245 || savedT2 > 999)

- {

- savedT2 = 380;

- }

- /* Write savedT2 to T2 */

- client_data->remote_write(client_data, (0xff00 & savedT2) >> 8, 0xb101);

- client_data->remote_write(client_data, (0x00ff & savedT2), 0xb102);

- }

- /* Done */

-

return 0;

}