--- drivers/usb/core/hub.c
+++ drivers/usb/core/hub.c
@@ -22,6 +22,7 @@
#include <linux/kthread.h>
#include <linux/mutex.h>
#include <linux/freezer.h>
+#include <linux/usb/quirks.h>
#include <asm/uaccess.h>
#include <asm/byteorder.h>
@@ -647,6 +648,8 @@ static void hub_init_func3(struct work_s
static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
{
struct usb_device *hdev = hub->hdev;
+ struct usb_hcd *hcd;
+ int ret;
int port1;
int status;
bool need_debounce_delay = false;
@@ -685,6 +688,25 @@ static void hub_activate(struct usb_hub
atomic_set(&to_usb_interface(hub->intfdev)->
pm_usage_cnt, 1);
return; /* Continues at init2: below */
+ } else if (type == HUB_RESET_RESUME) {
+ /* The internal host controller state for the hub device
+ * may be gone after a host power loss on system resume.
+ * Update the device's info so the HW knows it's a hub.
+ */
+ hcd = bus_to_hcd(hdev->bus);
+ if (hcd->driver->update_hub_device) {
+ ret = hcd->driver->update_hub_device(hcd, hdev,
+ &hub->tt, GFP_NOIO);
+ if (ret < 0) {
+ dev_err(hub->intfdev, "Host not "
+ "accepting hub info "
+ "update.\n");
+ dev_err(hub->intfdev, "LS/FS devices "
+ "and hubs may not work "
+ "under this hub\n.");
+ }
+ }
+ hub_power_on(hub, true);
} else {
hub_power_on(hub, true);
}
@@ -1768,7 +1790,6 @@ int usb_new_device(struct usb_device *ud
if (udev->parent)
usb_autoresume_device(udev->parent);
- usb_detect_quirks(udev);
err = usb_enumerate_device(udev); /* Read descriptors */
if (err < 0)
goto fail;
@@ -2683,6 +2704,11 @@ hub_port_init (struct usb_hub *hub, stru
udev->ttport = hdev->ttport;
} else if (udev->speed != USB_SPEED_HIGH
&& hdev->speed == USB_SPEED_HIGH) {
+ if (!hub->tt.hub) {
+ dev_err(&udev->dev, "parent hub has no TT\n");
+ retval = -EINVAL;
+ goto fail;
+ }
udev->tt = &hub->tt;
udev->ttport = port1;
}
@@ -2821,13 +2847,16 @@ hub_port_init (struct usb_hub *hub, stru
else
i = udev->descriptor.bMaxPacketSize0;
if (le16_to_cpu(udev->ep0.desc.wMaxPacketSize) != i) {
- if (udev->speed != USB_SPEED_FULL ||
+ if (udev->speed == USB_SPEED_LOW ||
!(i == 8 || i == 16 || i == 32 || i == 64)) {
- dev_err(&udev->dev, "ep0 maxpacket = %d\n", i);
+ dev_err(&udev->dev, "Invalid ep0 maxpacket: %d\n", i);
retval = -EMSGSIZE;
goto fail;
}
- dev_dbg(&udev->dev, "ep0 maxpacket = %d\n", i);
+ if (udev->speed == USB_SPEED_FULL)
+ dev_dbg(&udev->dev, "ep0 maxpacket = %d\n", i);
+ else
+ dev_warn(&udev->dev, "Using ep0 maxpacket: %d\n", i);
udev->ep0.desc.wMaxPacketSize = cpu_to_le16(i);
usb_ep0_reinit(udev);
}
@@ -3063,6 +3092,10 @@ static void hub_port_connect_change(stru
if (status < 0)
goto loop;
+ usb_detect_quirks(udev);
+ if (udev->quirks & USB_QUIRK_DELAY_INIT)
+ msleep(1000);
+
/* consecutive bus-powered hubs aren't reliable; they can
* violate the voltage drop budget. if the new child has
* a "powered" LED, users should notice we didn't enable it
projects / ziggy471-frankenstein-kernel.git / blobdiff