--- 8b7fcb3f18c06cc65a59d6acf94203b6384c90d4 +++ 3f8127584660a6162b7a5ea9c0fb24879d26258d @@ -1494,7 +1494,7 @@ static void sii8240_hw_onoff(bool onoff) if (mhl_l12 == NULL) { mhl_l12 = regulator_get(NULL, "8921_l12"); if (IS_ERR(mhl_l12)) - return ; + return; rc = regulator_set_voltage(mhl_l12, 1200000, 1200000); if (rc) @@ -1583,7 +1583,7 @@ static void sii8240_hw_reset(void) if (system_rev < 6) { if (gpio_direction_output(GPIO_MHL_RST, 1)) pr_err("%s error in making GPIO_MHL_RST HIGH\n", - __func__); + __func__); usleep_range(5000, 20000); if (gpio_direction_output(GPIO_MHL_RST, 0)) @@ -2215,7 +2215,7 @@ static void irda_led_poweron(int onoff) int ret; static struct regulator *reg_l10; if (system_rev >= BOARD_REV08 ) { - if(onoff) { + if(onoff) { if (!reg_l10) { reg_l10 = regulator_get(NULL, "8921_l10"); ret = regulator_set_voltage(reg_l10, 3300000, 3300000); @@ -2223,13 +2223,13 @@ static void irda_led_poweron(int onoff) if (IS_ERR(reg_l10)) { printk(KERN_ERR"could not get 8921_l10, rc = %ld\n", PTR_ERR(reg_l10)); - } - } + } + } ret = regulator_enable(reg_l10); - if (ret) - printk(KERN_ERR"enable l10 failed, rc=%d\n", ret); + if (ret) + printk(KERN_ERR"enable l10 failed, rc=%d\n", ret); } else { - if (regulator_is_enabled(reg_l10) ) { + if (regulator_is_enabled(reg_l10)) { ret = regulator_disable(reg_l10); if (ret) printk(KERN_ERR"disable l10 failed, rc=%d\n", ret); @@ -2244,10 +2244,10 @@ static int ice4_clock_en(int onoff) return 0; if (system_rev <= BOARD_REV09) { - if (onoff) - msm_xo_mode_vote(fpga_xo, MSM_XO_MODE_ON); - else - msm_xo_mode_vote(fpga_xo, MSM_XO_MODE_OFF); + if (onoff) + msm_xo_mode_vote(fpga_xo, MSM_XO_MODE_ON); + else + msm_xo_mode_vote(fpga_xo, MSM_XO_MODE_OFF); } else if (system_rev >= BOARD_REV10) { static struct clk *fpga_main_clk; if (!fpga_main_clk) @@ -2264,6 +2264,7 @@ static int ice4_clock_en(int onoff) } return 0; } + static void barcode_emul_poweron(int onoff) { int ret; @@ -2283,8 +2284,7 @@ static void barcode_emul_poweron(int ono } if (system_rev >= BOARD_REV02) { if (barcode_vreg_l33 == NULL) { - barcode_vreg_l33 = regulator_get(NULL, - "8917_l33"); + barcode_vreg_l33 = regulator_get(NULL, "8917_l33"); if (IS_ERR(barcode_vreg_l33)) return ; ret = regulator_set_voltage(barcode_vreg_l33, @@ -2321,7 +2321,8 @@ static void barcode_emul_poweron(int ono if (system_rev > BOARD_REV03) { fpga_xo = msm_xo_get(MSM_XO_TCXO_A0, "ice4_fpga"); if (IS_ERR(fpga_xo)) { - printk(KERN_ERR "%s: Couldn't get TCXO_A0 vote for ice4_fpga\n", + printk(KERN_ERR \ + "%s: Couldn't get TCXO_A0 vote for ice4_fpga\n", __func__); } } @@ -2345,15 +2346,15 @@ static void barcode_emul_poweron(int ono __func__); } if (system_rev >= BOARD_REV03) { - if (regulator_is_enabled(barcode_vreg_l33)) { - ret = regulator_disable(barcode_vreg_l33); - if (ret) - pr_err("%s: error disabling regulator\n", - __func__); + if (regulator_is_enabled(barcode_vreg_l33)) { + ret = regulator_disable(barcode_vreg_l33); + if (ret) + pr_err("%s: error disabling regulator\n", + __func__); + } } } } -} static void barcode_gpio_config(void); @@ -2397,7 +2398,6 @@ static void barcode_gpio_config(void) pr_info("%s\n", __func__); pm8xxx_gpio_config(PM8921_GPIO_PM_TO_SYS( \ PMIC_GPIO_FPGA_RST_N), &creset_b); - gpio_request_one(GPIO_FPGA_CDONE, GPIOF_IN, "FPGA_CDONE"); if (system_rev < BOARD_REV06) gpio_request_one(GPIO_FPGA_SPI_EN, GPIOF_OUT_INIT_LOW, @@ -3313,9 +3313,9 @@ static struct platform_device msm_tsens_ }; static struct msm_thermal_data msm_thermal_pdata = { - .sensor_id = 7, + .sensor_id = 0, .poll_ms = 250, - .limit_temp_degC = 60, + .limit_temp_degC = 75, .temp_hysteresis_degC = 10, .freq_step = 2, }; @@ -3383,14 +3383,14 @@ static struct msm_rpmrs_level msm_rpmrs_ MSM_PM_SLEEP_MODE_WAIT_FOR_INTERRUPT, MSM_RPMRS_LIMITS(ON, ACTIVE, MAX, ACTIVE), true, - 1, 784, 180000, 100, + 1, 650, 180000, 100, }, { MSM_PM_SLEEP_MODE_RETENTION, MSM_RPMRS_LIMITS(ON, ACTIVE, MAX, ACTIVE), true, - 415, 715, 340827, 475, + 415, 650, 340827, 475, }, { @@ -4484,7 +4484,7 @@ static struct msm_i2c_platform_data apq8 #if !defined(CONFIG_TDMB) static struct msm_i2c_platform_data apq8064_i2c_qup_gsbi4_pdata = { - .clk_freq = 100000, + .clk_freq = 400000, .src_clk_rate = 24000000, }; #endif