--- arch/arm/mach-msm/board-jf_cri.c
+++ arch/arm/mach-msm/board-jf_cri.c
@@ -1249,6 +1249,12 @@ static void __init apq8064_early_reserve
static struct msm_bus_vectors hsic_init_vectors[] = {
{
.src = MSM_BUS_MASTER_SPS,
+ .dst = MSM_BUS_SLAVE_EBI_CH0,
+ .ab = 0,
+ .ib = 0,
+ },
+ {
+ .src = MSM_BUS_MASTER_SPS,
.dst = MSM_BUS_SLAVE_SPS,
.ab = 0,
.ib = 0,
@@ -1259,9 +1265,15 @@ static struct msm_bus_vectors hsic_init_
static struct msm_bus_vectors hsic_max_vectors[] = {
{
.src = MSM_BUS_MASTER_SPS,
+ .dst = MSM_BUS_SLAVE_EBI_CH0,
+ .ab = 60000000, /* At least 480Mbps on bus. */
+ .ib = 960000000, /* MAX bursts rate */
+ },
+ {
+ .src = MSM_BUS_MASTER_SPS,
.dst = MSM_BUS_SLAVE_SPS,
.ab = 0,
- .ib = 256000000, /*vote for 32Mhz dfab clk rate*/
+ .ib = 512000000, /*vote for 64Mhz dfab clk rate*/
},
};
@@ -1457,7 +1469,7 @@ static void sii8240_hw_onoff(bool onoff)
if (mhl_l12 == NULL) {
mhl_l12 = regulator_get(NULL, "8921_l12");
if (IS_ERR(mhl_l12))
- return ;
+ return;
rc = regulator_set_voltage(mhl_l12,
1200000, 1200000);
if (rc)
@@ -1546,7 +1558,7 @@ static void sii8240_hw_reset(void)
if (system_rev < 6) {
if (gpio_direction_output(GPIO_MHL_RST, 1))
pr_err("%s error in making GPIO_MHL_RST HIGH\n",
- __func__);
+ __func__);
usleep_range(5000, 20000);
if (gpio_direction_output(GPIO_MHL_RST, 0))
@@ -3206,14 +3218,14 @@ static struct msm_rpmrs_level msm_rpmrs_
MSM_PM_SLEEP_MODE_WAIT_FOR_INTERRUPT,
MSM_RPMRS_LIMITS(ON, ACTIVE, MAX, ACTIVE),
true,
- 1, 784, 180000, 100,
+ 1, 650, 180000, 100,
},
{
MSM_PM_SLEEP_MODE_RETENTION,
MSM_RPMRS_LIMITS(ON, ACTIVE, MAX, ACTIVE),
true,
- 415, 715, 340827, 475,
+ 415, 650, 340827, 475,
},
{
@@ -4284,7 +4296,7 @@ static struct msm_i2c_platform_data apq8
};
static struct msm_i2c_platform_data apq8064_i2c_qup_gsbi4_pdata = {
- .clk_freq = 100000,
+ .clk_freq = 400000,
.src_clk_rate = 24000000,
};
@@ -5178,7 +5190,15 @@ static void __init apq8064_common_init(v
apq8064_epm_adc_init();
msm_pm_set_tz_retention_flag(1);
samsung_sys_class_init();
-
+
+#ifdef CONFIG_MFD_MAX77693
+ gpio_tlmm_config(GPIO_CFG(GPIO_IF_PMIC_IRQ, 0, GPIO_CFG_INPUT,
+ GPIO_CFG_NO_PULL, GPIO_CFG_2MA), GPIO_CFG_DISABLE);
+#endif
+#if defined(CONFIG_BATTERY_SAMSUNG)
+ msm8960_init_battery();
+#endif
+
#if defined(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI) || defined(CONFIG_TOUCHSCREEN_ATMEL_MXTS)
printk(KERN_DEBUG"[TSP] System revision, LPM mode : %d %d\n",
system_rev, poweroff_charging);
@@ -5199,11 +5219,6 @@ static void __init apq8064_common_init(v
if (ret)
pr_err("%s PMIC_GPIO_TKEY_INT config failed\n", __func__);
#endif
-#ifdef CONFIG_MFD_MAX77693
- gpio_tlmm_config(GPIO_CFG(GPIO_IF_PMIC_IRQ, 0, GPIO_CFG_INPUT,
- GPIO_CFG_NO_PULL, GPIO_CFG_2MA), GPIO_CFG_DISABLE);
-#endif
-
#ifdef CONFIG_BT_BCM4335
apq8064_bt_init();
#endif
@@ -5284,9 +5299,6 @@ static void __init samsung_jf_init(void)
#ifdef CONFIG_MSM_CAMERA
apq8064_init_cam();
#endif
-#if defined(CONFIG_BATTERY_SAMSUNG)
- msm8960_init_battery();
-#endif
#ifdef CONFIG_SENSORS_SSP
clear_ssp_gpio();
sensor_power_on_vdd(SNS_PWR_ON, SNS_PWR_ON);
projects / ziggy471-sgs4-jb.git / blobdiff