--- a/Documentation/cpu-freq/governors.txt
+++ b/Documentation/cpu-freq/governors.txt
@@ -29,6 +29,7 @@ Contents:
2.4 Ondemand
2.5 Conservative
2.6 Interactive
+2.7 SmartassV2
3. The Governor Interface in the CPUfreq Core
@@ -231,6 +232,38 @@ is 85.
timer_rate: Sample rate for reevaluating cpu load when the system is
not idle. Default is 30000 uS.
+2.7 SmartassV2
+---------------
+
+The CPUfreq governor "smartassV2", like other governors, aims to balance
+performance vs battery life by using low frequencies when load is low and
+ramping the frequency when necessary, fast enough to ensure responsiveness.
+
+The implementation of the governor is roughtly based on the idea of interactive.
+The idle loop is used to track when the CPU has idle cycles. The idle loop will
+set a relatively high rate timer to sample the load when appropriate, the timer
+will measure the load since it was set and schedule a work queue task to do the
+actual frequency change when necessary.
+
+The most important tunable is the "ideal" frequency: this governor will aim
+for this frequency, in the sense that it will ramp towards this frequency much
+more aggresively than beyond it - both when ramping up from below this frequency
+and when ramping down from above this frequency. Still, note, that when load is
+low enough the governor should choose the lowest available frequency regardless
+of the ideal frequency and similarly when load is consistently high enough the
+highest available frequency will be used.
+
+Smartass also tracks the state of the screen, and when screen is off (a.k.a
+sleep or suspended in the terms of this governor) a different ideal frequency
+is used. This is the only difference between the screen on and screen off
+states. Proper tuning of the awake_ideal_freq and sleep_ideal_freq should
+allow both high responsiveness when screen is on and utilizing the low
+frequency range when load is low, especially when screen is off.
+
+Finally, smartass is a highly customizable governor with almost everything
+tweakable through the sysfs. For a detailed explaination of each tunable,
+please see the inline comments at the begging of the code (smartass2.c).
+
3. The Governor Interface in the CPUfreq Core
=============================================
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -122,6 +122,12 @@ config CPU_FREQ_DEFAULT_GOV_INTERACTIVE
loading your cpufreq low-level hardware driver, using the
'interactive' governor for latency-sensitive workloads.
+config CPU_FREQ_DEFAULT_GOV_SMARTASSV2
+ bool "smartass2"
+ select CPU_FREQ_GOV_SMARTASSV2
+ help
+ Use the CPUFreq governor 'smartassV2' as default.
+
endchoice
config CPU_FREQ_GOV_PERFORMANCE
@@ -270,6 +276,95 @@ config LAGFREE_FREQ_STEP_UP_SLEEP_PERCEN
depends on CPU_FREQ_GOV_LAGFREE
help
Frequency percent to step up while screen off.
+
+config CPU_FREQ_GOV_SMARTASSV2
+ tristate "'smartassV2' cpufreq governor"
+ depends on CPU_FREQ
+ help
+ 'smartassV2' - a "smart" governor
+ If in doubt, say N.
+
+config SMARTASSV2_SLEEP_IDEAL_FREQ
+ int "The ideal frequency to use when awake."
+ default 768000
+ depends on CPU_FREQ_GOV_SMARTASSV2
+ help
+ The "ideal" frequency to use when awake. The governor will ramp up faster
+ towards the ideal frequency and slower after it has passed it. Similarly,
+ lowering the frequency towards the ideal frequency is faster than below it.
+
+config SMARTASSV2_AWAKE_IDEAL_FREQ
+ int "The ideal frequency to use when suspended."
+ default 192000
+ depends on CPU_FREQ_GOV_SMARTASSV2
+ help
+ The "ideal" frequency to use when suspended.
+ When set to 0, the governor will not track the suspended state (meaning
+ that practically when sleep_ideal_freq==0 the awake_ideal_freq is used
+ also when suspended).
+
+config SMARTASSV2_RAMP_UP_STEP
+ int "Freqeuncy delta when ramping up above the ideal freqeuncy."
+ default 256000
+ depends on CPU_FREQ_GOV_SMARTASSV2
+ help
+ Freqeuncy delta when ramping up above the ideal freqeuncy.
+ Zero disables and causes to always jump straight to max frequency.
+ When below the ideal freqeuncy we always ramp up to the ideal freq.
+
+config SMARTASSV2_RAMP_DOWN_STEP
+ int "Freqeuncy delta when ramping down below the ideal freqeuncy."
+ default 256000
+ depends on CPU_FREQ_GOV_SMARTASSV2
+ help
+ Freqeuncy delta when ramping down below the ideal freqeuncy.
+ Zero disables and will calculate ramp down according to load heuristic.
+ When above the ideal freqeuncy we always ramp down to the ideal freq.
+
+config SMARTASSV2_MAX_CPU_LOAD
+ int "CPU freq will be increased if measured load > max_cpu_load."
+ default 50
+ depends on CPU_FREQ_GOV_SMARTASSV2
+ help
+ CPU freq will be increased if measured load > max_cpu_load.
+
+config SMARTASSV2_MIN_CPU_LOAD
+ int "CPU freq will be decreased if measured load < max_cpu_load."
+ default 25
+ depends on CPU_FREQ_GOV_SMARTASSV2
+ help
+ CPU freq will be decreased if measured load < max_cpu_load.
+
+config SMARTASSV2_UP_RATE_US
+ int "The minimum amount of time to spend at a frequency before we can ramp up."
+ default 48000
+ depends on CPU_FREQ_GOV_SMARTASSV2
+ help
+ The minimum amount of time to spend at a frequency before we can ramp up.
+ Notice we ignore this when we are below the ideal frequency.
+
+config SMARTASSV2_DOWN_RATE_US
+ int "The minimum amount of time to spend at a frequency before we can ramp down."
+ default 99000
+ depends on CPU_FREQ_GOV_SMARTASSV2
+ help
+ The minimum amount of time to spend at a frequency before we can ramp down.
+ Notice we ignore this when we are below the ideal frequency.
+
+config SMARTASSV2_SLEEP_WAKEUP_FREQ
+ int "The frequency to set when waking up from sleep."
+ default 99999999
+ depends on CPU_FREQ_GOV_SMARTASSV2
+ help
+ The frequency to set when waking up from sleep.
+ When sleep_ideal_freq=0 this will have no effect.
+
+config SMARTASSV2_SAMPLE_RATE_JIFFIES
+ int "Sampling rate."
+ default 2
+ depends on CPU_FREQ_GOV_SMARTASSV2
+ help
+ Sampling rate, I highly recommend to leave it at 2.
config CPU_FREQ_MIN_TICKS
int "Ticks between governor polling interval."
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_CPU_FREQ_GOV_ONDEMAND) +=
obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE) += cpufreq_conservative.o
obj-$(CONFIG_CPU_FREQ_GOV_LAGFREE) += cpufreq_lagfree.o
obj-$(CONFIG_CPU_FREQ_GOV_INTERACTIVE) += cpufreq_interactive.o
+obj-$(CONFIG_CPU_FREQ_GOV_SMARTASSV2) += cpufreq_smartass2.o
# CPUfreq cross-arch helpers
obj-$(CONFIG_CPU_FREQ_TABLE) += freq_table.o
--- /dev/null
+++ b/drivers/cpufreq/cpufreq_smartass2.c
@@ -0,0 +1,868 @@
+/*
+ * drivers/cpufreq/cpufreq_smartass2.c
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Author: Erasmux
+ *
+ * Based on the interactive governor By Mike Chan (mike@android.com)
+ * which was adaptated to 2.6.29 kernel by Nadlabak (pavel@doshaska.net)
+ *
+ * SMP support based on mod by faux123
+ *
+ * For a general overview of smartassV2 see the relavent part in
+ * Documentation/cpu-freq/governors.txt
+ *
+ */
+
+#include <linux/cpu.h>
+#include <linux/cpumask.h>
+#include <linux/cpufreq.h>
+#include <linux/sched.h>
+#include <linux/tick.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <linux/moduleparam.h>
+#include <asm/cputime.h>
+#include <linux/earlysuspend.h>
+
+
+/******************** Tunable parameters: ********************/
+
+/*
+ * The "ideal" frequency to use when awake. The governor will ramp up faster
+ * towards the ideal frequency and slower after it has passed it. Similarly,
+ * lowering the frequency towards the ideal frequency is faster than below it.
+ */
+#define DEFAULT_AWAKE_IDEAL_FREQ CONFIG_SMARTASSV2_AWAKE_IDEAL_FREQ
+static unsigned int awake_ideal_freq;
+
+/*
+ * The "ideal" frequency to use when suspended.
+ * When set to 0, the governor will not track the suspended state (meaning
+ * that practically when sleep_ideal_freq==0 the awake_ideal_freq is used
+ * also when suspended).
+ */
+#define DEFAULT_SLEEP_IDEAL_FREQ CONFIG_SMARTASSV2_AWAKE_IDEAL_FREQ
+static unsigned int sleep_ideal_freq;
+
+/*
+ * Freqeuncy delta when ramping up above the ideal freqeuncy.
+ * Zero disables and causes to always jump straight to max frequency.
+ * When below the ideal freqeuncy we always ramp up to the ideal freq.
+ */
+#define DEFAULT_RAMP_UP_STEP CONFIG_SMARTASSV2_RAMP_UP_STEP
+static unsigned int ramp_up_step;
+
+/*
+ * Freqeuncy delta when ramping down below the ideal freqeuncy.
+ * Zero disables and will calculate ramp down according to load heuristic.
+ * When above the ideal freqeuncy we always ramp down to the ideal freq.
+ */
+#define DEFAULT_RAMP_DOWN_STEP CONFIG_SMARTASSV2_RAMP_DOWN_STEP
+static unsigned int ramp_down_step;
+
+/*
+ * CPU freq will be increased if measured load > max_cpu_load;
+ */
+#define DEFAULT_MAX_CPU_LOAD CONFIG_SMARTASSV2_MAX_CPU_LOAD
+static unsigned long max_cpu_load;
+
+/*
+ * CPU freq will be decreased if measured load < min_cpu_load;
+ */
+#define DEFAULT_MIN_CPU_LOAD CONFIG_SMARTASSV2_MIN_CPU_LOAD
+static unsigned long min_cpu_load;
+
+/*
+ * The minimum amount of time to spend at a frequency before we can ramp up.
+ * Notice we ignore this when we are below the ideal frequency.
+ */
+#define DEFAULT_UP_RATE_US CONFIG_SMARTASSV2_UP_RATE_US;
+static unsigned long up_rate_us;
+
+/*
+ * The minimum amount of time to spend at a frequency before we can ramp down.
+ * Notice we ignore this when we are above the ideal frequency.
+ */
+#define DEFAULT_DOWN_RATE_US CONFIG_SMARTASSV2_DOWN_RATE_US;
+static unsigned long down_rate_us;
+
+/*
+ * The frequency to set when waking up from sleep.
+ * When sleep_ideal_freq=0 this will have no effect.
+ */
+#define DEFAULT_SLEEP_WAKEUP_FREQ CONFIG_SMARTASSV2_SLEEP_WAKEUP_FREQ
+static unsigned int sleep_wakeup_freq;
+
+/*
+ * Sampling rate, I highly recommend to leave it at 2.
+ */
+#define DEFAULT_SAMPLE_RATE_JIFFIES CONFIG_SMARTASSV2_SAMPLE_RATE_JIFFIES
+static unsigned int sample_rate_jiffies;
+
+
+/*************** End of tunables ***************/
+
+
+static void (*pm_idle_old)(void);
+static atomic_t active_count = ATOMIC_INIT(0);
+
+struct smartass_info_s {
+ struct cpufreq_policy *cur_policy;
+ struct cpufreq_frequency_table *freq_table;
+ struct timer_list timer;
+ u64 time_in_idle;
+ u64 idle_exit_time;
+ u64 freq_change_time;
+ u64 freq_change_time_in_idle;
+ int cur_cpu_load;
+ int old_freq;
+ int ramp_dir;
+ unsigned int enable;
+ int ideal_speed;
+};
+static DEFINE_PER_CPU(struct smartass_info_s, smartass_info);
+
+/* Workqueues handle frequency scaling */
+static struct workqueue_struct *up_wq;
+static struct workqueue_struct *down_wq;
+static struct work_struct freq_scale_work;
+
+static cpumask_t work_cpumask;
+static spinlock_t cpumask_lock;
+
+static unsigned int suspended;
+
+#define dprintk(flag,msg...) do { \
+ if (debug_mask & flag) printk(KERN_DEBUG msg); \
+ } while (0)
+
+enum {
+ SMARTASS_DEBUG_JUMPS=1,
+ SMARTASS_DEBUG_LOAD=2,
+ SMARTASS_DEBUG_ALG=4
+};
+
+/*
+ * Combination of the above debug flags.
+ */
+static unsigned long debug_mask;
+
+static int cpufreq_governor_smartass(struct cpufreq_policy *policy,
+ unsigned int event);
+
+#ifndef CONFIG_CPU_FREQ_DEFAULT_GOV_SMARTASSV2
+static
+#endif
+struct cpufreq_governor cpufreq_gov_smartassv2 = {
+ .name = "smartassV2",
+ .governor = cpufreq_governor_smartass,
+ .max_transition_latency = 9000000,
+ .owner = THIS_MODULE,
+};
+
+inline static void smartass_update_min_max(struct smartass_info_s *this_smartass, struct cpufreq_policy *policy, int suspend) {
+ if (suspend) {
+ this_smartass->ideal_speed = // sleep_ideal_freq; but make sure it obeys the policy min/max
+ policy->max > sleep_ideal_freq ?
+ (sleep_ideal_freq > policy->min ? sleep_ideal_freq : policy->min) : policy->max;
+ } else {
+ this_smartass->ideal_speed = // awake_ideal_freq; but make sure it obeys the policy min/max
+ policy->min < awake_ideal_freq ?
+ (awake_ideal_freq < policy->max ? awake_ideal_freq : policy->max) : policy->min;
+ }
+}
+
+inline static void smartass_update_min_max_allcpus(void) {
+ unsigned int i;
+ for_each_online_cpu(i) {
+ struct smartass_info_s *this_smartass = &per_cpu(smartass_info, i);
+ if (this_smartass->enable)
+ smartass_update_min_max(this_smartass,this_smartass->cur_policy,suspended);
+ }
+}
+
+inline static unsigned int validate_freq(struct cpufreq_policy *policy, int freq) {
+ if (freq > (int)policy->max)
+ return policy->max;
+ if (freq < (int)policy->min)
+ return policy->min;
+ return freq;
+}
+
+inline static void reset_timer(unsigned long cpu, struct smartass_info_s *this_smartass) {
+ this_smartass->time_in_idle = get_cpu_idle_time_us(cpu, &this_smartass->idle_exit_time);
+ mod_timer(&this_smartass->timer, jiffies + sample_rate_jiffies);
+}
+
+inline static void work_cpumask_set(unsigned long cpu) {
+ unsigned long flags;
+ spin_lock_irqsave(&cpumask_lock, flags);
+ cpumask_set_cpu(cpu, &work_cpumask);
+ spin_unlock_irqrestore(&cpumask_lock, flags);
+}
+
+inline static int work_cpumask_test_and_clear(unsigned long cpu) {
+ unsigned long flags;
+ int res = 0;
+ spin_lock_irqsave(&cpumask_lock, flags);
+ res = cpumask_test_and_clear_cpu(cpu, &work_cpumask);
+ spin_unlock_irqrestore(&cpumask_lock, flags);
+ return res;
+}
+
+inline static int target_freq(struct cpufreq_policy *policy, struct smartass_info_s *this_smartass,
+ int new_freq, int old_freq, int prefered_relation) {
+ int index, target;
+ struct cpufreq_frequency_table *table = this_smartass->freq_table;
+
+ if (new_freq == old_freq)
+ return 0;
+ new_freq = validate_freq(policy,new_freq);
+ if (new_freq == old_freq)
+ return 0;
+
+ if (table &&
+ !cpufreq_frequency_table_target(policy,table,new_freq,prefered_relation,&index))
+ {
+ target = table[index].frequency;
+ if (target == old_freq) {
+ // if for example we are ramping up to *at most* current + ramp_up_step
+ // but there is no such frequency higher than the current, try also
+ // to ramp up to *at least* current + ramp_up_step.
+ if (new_freq > old_freq && prefered_relation==CPUFREQ_RELATION_H
+ && !cpufreq_frequency_table_target(policy,table,new_freq,
+ CPUFREQ_RELATION_L,&index))
+ target = table[index].frequency;
+ // simlarly for ramping down:
+ else if (new_freq < old_freq && prefered_relation==CPUFREQ_RELATION_L
+ && !cpufreq_frequency_table_target(policy,table,new_freq,
+ CPUFREQ_RELATION_H,&index))
+ target = table[index].frequency;
+ }
+
+ if (target == old_freq) {
+ // We should not get here:
+ // If we got here we tried to change to a validated new_freq which is different
+ // from old_freq, so there is no reason for us to remain at same frequency.
+ printk(KERN_WARNING "Smartass: frequency change failed: %d to %d => %d\n",
+ old_freq,new_freq,target);
+ return 0;
+ }
+ }
+ else target = new_freq;
+
+ __cpufreq_driver_target(policy, target, prefered_relation);
+
+ dprintk(SMARTASS_DEBUG_JUMPS,"SmartassQ: jumping from %d to %d => %d (%d)\n",
+ old_freq,new_freq,target,policy->cur);
+
+ return target;
+}
+
+static void cpufreq_smartass_timer(unsigned long cpu)
+{
+ u64 delta_idle;
+ u64 delta_time;
+ int cpu_load;
+ int old_freq;
+ u64 update_time;
+ u64 now_idle;
+ int queued_work = 0;
+ struct smartass_info_s *this_smartass = &per_cpu(smartass_info, cpu);
+ struct cpufreq_policy *policy = this_smartass->cur_policy;
+
+ now_idle = get_cpu_idle_time_us(cpu, &update_time);
+ old_freq = policy->cur;
+
+ if (this_smartass->idle_exit_time == 0 || update_time == this_smartass->idle_exit_time)
+ return;
+
+ delta_idle = cputime64_sub(now_idle, this_smartass->time_in_idle);
+ delta_time = cputime64_sub(update_time, this_smartass->idle_exit_time);
+
+ // If timer ran less than 1ms after short-term sample started, retry.
+ if (delta_time < 1000) {
+ if (!timer_pending(&this_smartass->timer))
+ reset_timer(cpu,this_smartass);
+ return;
+ }
+
+ if (delta_idle > delta_time)
+ cpu_load = 0;
+ else
+ cpu_load = 100 * (unsigned int)(delta_time - delta_idle) / (unsigned int)delta_time;
+
+ dprintk(SMARTASS_DEBUG_LOAD,"smartassT @ %d: load %d (delta_time %llu)\n",
+ old_freq,cpu_load,delta_time);
+
+ this_smartass->cur_cpu_load = cpu_load;
+ this_smartass->old_freq = old_freq;
+
+ // Scale up if load is above max or if there where no idle cycles since coming out of idle,
+ // additionally, if we are at or above the ideal_speed, verify we have been at this frequency
+ // for at least up_rate_us:
+ if (cpu_load > max_cpu_load || delta_idle == 0)
+ {
+ if (old_freq < policy->max &&
+ (old_freq < this_smartass->ideal_speed || delta_idle == 0 ||
+ cputime64_sub(update_time, this_smartass->freq_change_time) >= up_rate_us))
+ {
+ dprintk(SMARTASS_DEBUG_ALG,"smartassT @ %d ramp up: load %d (delta_idle %llu)\n",
+ old_freq,cpu_load,delta_idle);
+ this_smartass->ramp_dir = 1;
+ work_cpumask_set(cpu);
+ queue_work(up_wq, &freq_scale_work);
+ queued_work = 1;
+ }
+ else this_smartass->ramp_dir = 0;
+ }
+ // Similarly for scale down: load should be below min and if we are at or below ideal
+ // frequency we require that we have been at this frequency for at least down_rate_us:
+ else if (cpu_load < min_cpu_load && old_freq > policy->min &&
+ (old_freq > this_smartass->ideal_speed ||
+ cputime64_sub(update_time, this_smartass->freq_change_time) >= down_rate_us))
+ {
+ dprintk(SMARTASS_DEBUG_ALG,"smartassT @ %d ramp down: load %d (delta_idle %llu)\n",
+ old_freq,cpu_load,delta_idle);
+ this_smartass->ramp_dir = -1;
+ work_cpumask_set(cpu);
+ queue_work(down_wq, &freq_scale_work);
+ queued_work = 1;
+ }
+ else this_smartass->ramp_dir = 0;
+
+ // To avoid unnecessary load when the CPU is already at high load, we don't
+ // reset ourselves if we are at max speed. If and when there are idle cycles,
+ // the idle loop will activate the timer.
+ // Additionally, if we queued some work, the work task will reset the timer
+ // after it has done its adjustments.
+ if (!queued_work && old_freq < policy->max)
+ reset_timer(cpu,this_smartass);
+}
+
+static void cpufreq_idle(void)
+{
+ struct smartass_info_s *this_smartass = &per_cpu(smartass_info, smp_processor_id());
+ struct cpufreq_policy *policy = this_smartass->cur_policy;
+
+ if (!this_smartass->enable) {
+ pm_idle_old();
+ return;
+ }
+
+ if (policy->cur == policy->min && timer_pending(&this_smartass->timer))
+ del_timer(&this_smartass->timer);
+
+ pm_idle_old();
+
+ if (!timer_pending(&this_smartass->timer))
+ reset_timer(smp_processor_id(), this_smartass);
+}
+
+/* We use the same work function to sale up and down */
+static void cpufreq_smartass_freq_change_time_work(struct work_struct *work)
+{
+ unsigned int cpu;
+ int new_freq;
+ int old_freq;
+ int ramp_dir;
+ struct smartass_info_s *this_smartass;
+ struct cpufreq_policy *policy;
+ unsigned int relation = CPUFREQ_RELATION_L;
+ for_each_possible_cpu(cpu) {
+ this_smartass = &per_cpu(smartass_info, cpu);
+ if (!work_cpumask_test_and_clear(cpu))
+ continue;
+
+ ramp_dir = this_smartass->ramp_dir;
+ this_smartass->ramp_dir = 0;
+
+ old_freq = this_smartass->old_freq;
+ policy = this_smartass->cur_policy;
+
+ if (old_freq != policy->cur) {
+ // frequency was changed by someone else?
+ printk(KERN_WARNING "Smartass: frequency changed by 3rd party: %d to %d\n",
+ old_freq,policy->cur);
+ new_freq = old_freq;
+ }
+ else if (ramp_dir > 0 && nr_running() > 1) {
+ // ramp up logic:
+ if (old_freq < this_smartass->ideal_speed)
+ new_freq = this_smartass->ideal_speed;
+ else if (ramp_up_step) {
+ new_freq = old_freq + ramp_up_step;
+ relation = CPUFREQ_RELATION_H;
+ }
+ else {
+ new_freq = policy->max;
+ relation = CPUFREQ_RELATION_H;
+ }
+ dprintk(SMARTASS_DEBUG_ALG,"smartassQ @ %d ramp up: ramp_dir=%d ideal=%d\n",
+ old_freq,ramp_dir,this_smartass->ideal_speed);
+ }
+ else if (ramp_dir < 0) {
+ // ramp down logic:
+ if (old_freq > this_smartass->ideal_speed) {
+ new_freq = this_smartass->ideal_speed;
+ relation = CPUFREQ_RELATION_H;
+ }
+ else if (ramp_down_step)
+ new_freq = old_freq - ramp_down_step;
+ else {
+ // Load heuristics: Adjust new_freq such that, assuming a linear
+ // scaling of load vs. frequency, the load in the new frequency
+ // will be max_cpu_load:
+ new_freq = old_freq * this_smartass->cur_cpu_load / max_cpu_load;
+ if (new_freq > old_freq) // min_cpu_load > max_cpu_load ?!
+ new_freq = old_freq -1;
+ }
+ dprintk(SMARTASS_DEBUG_ALG,"smartassQ @ %d ramp down: ramp_dir=%d ideal=%d\n",
+ old_freq,ramp_dir,this_smartass->ideal_speed);
+ }
+ else { // ramp_dir==0 ?! Could the timer change its mind about a queued ramp up/down
+ // before the work task gets to run?
+ // This may also happen if we refused to ramp up because the nr_running()==1
+ new_freq = old_freq;
+ dprintk(SMARTASS_DEBUG_ALG,"smartassQ @ %d nothing: ramp_dir=%d nr_running=%lu\n",
+ old_freq,ramp_dir,nr_running());
+ }
+
+ // do actual ramp up (returns 0, if frequency change failed):
+ new_freq = target_freq(policy,this_smartass,new_freq,old_freq,relation);
+ if (new_freq)
+ this_smartass->freq_change_time_in_idle =
+ get_cpu_idle_time_us(cpu,&this_smartass->freq_change_time);
+
+ // reset timer:
+ if (new_freq < policy->max)
+ reset_timer(cpu,this_smartass);
+ // if we are maxed out, it is pointless to use the timer
+ // (idle cycles wake up the timer when the timer comes)
+ else if (timer_pending(&this_smartass->timer))
+ del_timer(&this_smartass->timer);
+ }
+}
+
+static ssize_t show_debug_mask(struct kobject *kobj, struct attribute *attr, char *buf)
+{
+ return sprintf(buf, "%lu\n", debug_mask);
+}
+
+static ssize_t store_debug_mask(struct kobject *kobj, struct attribute *attr, const char *buf, size_t count)
+{
+ ssize_t res;
+ unsigned long input;
+ res = strict_strtoul(buf, 0, &input);
+ if (res >= 0)
+ debug_mask = input;
+ return res;
+}
+
+static ssize_t show_up_rate_us(struct kobject *kobj, struct attribute *attr, char *buf)
+{
+ return sprintf(buf, "%lu\n", up_rate_us);
+}
+
+static ssize_t store_up_rate_us(struct kobject *kobj, struct attribute *attr, const char *buf, size_t count)
+{
+ ssize_t res;
+ unsigned long input;
+ res = strict_strtoul(buf, 0, &input);
+ if (res >= 0 && input >= 0 && input <= 100000000)
+ up_rate_us = input;
+ return res;
+}
+
+static ssize_t show_down_rate_us(struct kobject *kobj, struct attribute *attr, char *buf)
+{
+ return sprintf(buf, "%lu\n", down_rate_us);
+}
+
+static ssize_t store_down_rate_us(struct kobject *kobj, struct attribute *attr, const char *buf, size_t count)
+{
+ ssize_t res;
+ unsigned long input;
+ res = strict_strtoul(buf, 0, &input);
+ if (res >= 0 && input >= 0 && input <= 100000000)
+ down_rate_us = input;
+ return res;
+}
+
+static ssize_t show_sleep_ideal_freq(struct kobject *kobj, struct attribute *attr, char *buf)
+{
+ return sprintf(buf, "%u\n", sleep_ideal_freq);
+}
+
+static ssize_t store_sleep_ideal_freq(struct kobject *kobj, struct attribute *attr, const char *buf, size_t count)
+{
+ ssize_t res;
+ unsigned long input;
+ res = strict_strtoul(buf, 0, &input);
+ if (res >= 0 && input >= 0) {
+ sleep_ideal_freq = input;
+ if (suspended)
+ smartass_update_min_max_allcpus();
+ }
+ return res;
+}
+
+static ssize_t show_sleep_wakeup_freq(struct kobject *kobj, struct attribute *attr, char *buf)
+{
+ return sprintf(buf, "%u\n", sleep_wakeup_freq);
+}
+
+static ssize_t store_sleep_wakeup_freq(struct kobject *kobj, struct attribute *attr, const char *buf, size_t count)
+{
+ ssize_t res;
+ unsigned long input;
+ res = strict_strtoul(buf, 0, &input);
+ if (res >= 0 && input >= 0)
+ sleep_wakeup_freq = input;
+ return res;
+}
+
+static ssize_t show_awake_ideal_freq(struct kobject *kobj, struct attribute *attr, char *buf)
+{
+ return sprintf(buf, "%u\n", awake_ideal_freq);
+}
+
+static ssize_t store_awake_ideal_freq(struct kobject *kobj, struct attribute *attr, const char *buf, size_t count)
+{
+ ssize_t res;
+ unsigned long input;
+ res = strict_strtoul(buf, 0, &input);
+ if (res >= 0 && input >= 0) {
+ awake_ideal_freq = input;
+ if (!suspended)
+ smartass_update_min_max_allcpus();
+ }
+ return res;
+}
+
+static ssize_t show_sample_rate_jiffies(struct kobject *kobj, struct attribute *attr, char *buf)
+{
+ return sprintf(buf, "%u\n", sample_rate_jiffies);
+}
+
+static ssize_t store_sample_rate_jiffies(struct kobject *kobj, struct attribute *attr, const char *buf, size_t count)
+{
+ ssize_t res;
+ unsigned long input;
+ res = strict_strtoul(buf, 0, &input);
+ if (res >= 0 && input > 0 && input <= 1000)
+ sample_rate_jiffies = input;
+ return res;
+}
+
+static ssize_t show_ramp_up_step(struct kobject *kobj, struct attribute *attr, char *buf)
+{
+ return sprintf(buf, "%u\n", ramp_up_step);
+}
+
+static ssize_t store_ramp_up_step(struct kobject *kobj, struct attribute *attr, const char *buf, size_t count)
+{
+ ssize_t res;
+ unsigned long input;
+ res = strict_strtoul(buf, 0, &input);
+ if (res >= 0 && input >= 0)
+ ramp_up_step = input;
+ return res;
+}
+
+static ssize_t show_ramp_down_step(struct kobject *kobj, struct attribute *attr, char *buf)
+{
+ return sprintf(buf, "%u\n", ramp_down_step);
+}
+
+static ssize_t store_ramp_down_step(struct kobject *kobj, struct attribute *attr, const char *buf, size_t count)
+{
+ ssize_t res;
+ unsigned long input;
+ res = strict_strtoul(buf, 0, &input);
+ if (res >= 0 && input >= 0)
+ ramp_down_step = input;
+ return res;
+}
+
+static ssize_t show_max_cpu_load(struct kobject *kobj, struct attribute *attr, char *buf)
+{
+ return sprintf(buf, "%lu\n", max_cpu_load);
+}
+
+static ssize_t store_max_cpu_load(struct kobject *kobj, struct attribute *attr, const char *buf, size_t count)
+{
+ ssize_t res;
+ unsigned long input;
+ res = strict_strtoul(buf, 0, &input);
+ if (res >= 0 && input > 0 && input <= 100)
+ max_cpu_load = input;
+ return res;
+}
+
+static ssize_t show_min_cpu_load(struct kobject *kobj, struct attribute *attr, char *buf)
+{
+ return sprintf(buf, "%lu\n", min_cpu_load);
+}
+
+static ssize_t store_min_cpu_load(struct kobject *kobj, struct attribute *attr, const char *buf, size_t count)
+{
+ ssize_t res;
+ unsigned long input;
+ res = strict_strtoul(buf, 0, &input);
+ if (res >= 0 && input > 0 && input < 100)
+ min_cpu_load = input;
+ return res;
+}
+
+#define define_global_rw_attr(_name) \
+static struct global_attr _name##_attr = \
+ __ATTR(_name, 0644, show_##_name, store_##_name)
+
+define_global_rw_attr(debug_mask);
+define_global_rw_attr(up_rate_us);
+define_global_rw_attr(down_rate_us);
+define_global_rw_attr(sleep_ideal_freq);
+define_global_rw_attr(sleep_wakeup_freq);
+define_global_rw_attr(awake_ideal_freq);
+define_global_rw_attr(sample_rate_jiffies);
+define_global_rw_attr(ramp_up_step);
+define_global_rw_attr(ramp_down_step);
+define_global_rw_attr(max_cpu_load);
+define_global_rw_attr(min_cpu_load);
+
+static struct attribute * smartass_attributes[] = {
+ &debug_mask_attr.attr,
+ &up_rate_us_attr.attr,
+ &down_rate_us_attr.attr,
+ &sleep_ideal_freq_attr.attr,
+ &sleep_wakeup_freq_attr.attr,
+ &awake_ideal_freq_attr.attr,
+ &sample_rate_jiffies_attr.attr,
+ &ramp_up_step_attr.attr,
+ &ramp_down_step_attr.attr,
+ &max_cpu_load_attr.attr,
+ &min_cpu_load_attr.attr,
+ NULL,
+};
+
+static struct attribute_group smartass_attr_group = {
+ .attrs = smartass_attributes,
+ .name = "smartass",
+};
+
+static int cpufreq_governor_smartass(struct cpufreq_policy *new_policy,
+ unsigned int event)
+{
+ unsigned int cpu = new_policy->cpu;
+ int rc;
+ struct smartass_info_s *this_smartass = &per_cpu(smartass_info, cpu);
+
+ switch (event) {
+ case CPUFREQ_GOV_START:
+ if ((!cpu_online(cpu)) || (!new_policy->cur))
+ return -EINVAL;
+
+ this_smartass->cur_policy = new_policy;
+
+ this_smartass->enable = 1;
+
+ smartass_update_min_max(this_smartass,new_policy,suspended);
+
+ this_smartass->freq_table = cpufreq_frequency_get_table(cpu);
+ if (!this_smartass->freq_table)
+ printk(KERN_WARNING "Smartass: no frequency table for cpu %d?!\n",cpu);
+
+ smp_wmb();
+
+ // Do not register the idle hook and create sysfs
+ // entries if we have already done so.
+ if (atomic_inc_return(&active_count) <= 1) {
+ rc = sysfs_create_group(cpufreq_global_kobject,
+ &smartass_attr_group);
+ if (rc)
+ return rc;
+
+ pm_idle_old = pm_idle;
+ pm_idle = cpufreq_idle;
+ }
+
+ if (this_smartass->cur_policy->cur < new_policy->max && !timer_pending(&this_smartass->timer))
+ reset_timer(cpu,this_smartass);
+
+ break;
+
+ case CPUFREQ_GOV_LIMITS:
+ smartass_update_min_max(this_smartass,new_policy,suspended);
+
+ if (this_smartass->cur_policy->cur > new_policy->max) {
+ dprintk(SMARTASS_DEBUG_JUMPS,"SmartassI: jumping to new max freq: %d\n",new_policy->max);
+ __cpufreq_driver_target(this_smartass->cur_policy,
+ new_policy->max, CPUFREQ_RELATION_H);
+ }
+ else if (this_smartass->cur_policy->cur < new_policy->min) {
+ dprintk(SMARTASS_DEBUG_JUMPS,"SmartassI: jumping to new min freq: %d\n",new_policy->min);
+ __cpufreq_driver_target(this_smartass->cur_policy,
+ new_policy->min, CPUFREQ_RELATION_L);
+ }
+
+ if (this_smartass->cur_policy->cur < new_policy->max && !timer_pending(&this_smartass->timer))
+ reset_timer(cpu,this_smartass);
+
+ break;
+
+ case CPUFREQ_GOV_STOP:
+ this_smartass->enable = 0;
+ smp_wmb();
+ del_timer(&this_smartass->timer);
+ flush_work(&freq_scale_work);
+ this_smartass->idle_exit_time = 0;
+
+ if (atomic_dec_return(&active_count) <= 1) {
+ sysfs_remove_group(cpufreq_global_kobject,
+ &smartass_attr_group);
+ pm_idle = pm_idle_old;
+ }
+ break;
+ }
+
+ return 0;
+}
+
+static void smartass_suspend(int cpu, int suspend)
+{
+ struct smartass_info_s *this_smartass = &per_cpu(smartass_info, smp_processor_id());
+ struct cpufreq_policy *policy = this_smartass->cur_policy;
+ unsigned int new_freq;
+
+ if (!this_smartass->enable)
+ return;
+
+ smartass_update_min_max(this_smartass,policy,suspend);
+ if (!suspend) { // resume at max speed:
+ new_freq = validate_freq(policy,sleep_wakeup_freq);
+
+ dprintk(SMARTASS_DEBUG_JUMPS,"SmartassS: awaking at %d\n",new_freq);
+
+ __cpufreq_driver_target(policy, new_freq,
+ CPUFREQ_RELATION_L);
+ } else {
+ // to avoid wakeup issues with quick sleep/wakeup don't change actual frequency when entering sleep
+ // to allow some time to settle down. Instead we just reset our statistics (and reset the timer).
+ // Eventually, the timer will adjust the frequency if necessary.
+
+ this_smartass->freq_change_time_in_idle =
+ get_cpu_idle_time_us(cpu,&this_smartass->freq_change_time);
+
+ dprintk(SMARTASS_DEBUG_JUMPS,"SmartassS: suspending at %d\n",policy->cur);
+ }
+
+ reset_timer(smp_processor_id(),this_smartass);
+}
+
+static void smartass_early_suspend(struct early_suspend *handler) {
+ int i;
+ if (suspended || sleep_ideal_freq==0) // disable behavior for sleep_ideal_freq==0
+ return;
+ suspended = 1;
+ for_each_online_cpu(i)
+ smartass_suspend(i,1);
+}
+
+static void smartass_late_resume(struct early_suspend *handler) {
+ int i;
+ if (!suspended) // already not suspended so nothing to do
+ return;
+ suspended = 0;
+ for_each_online_cpu(i)
+ smartass_suspend(i,0);
+}
+
+static struct early_suspend smartass_power_suspend = {
+ .suspend = smartass_early_suspend,
+ .resume = smartass_late_resume,
+#ifdef CONFIG_MACH_HERO
+ .level = EARLY_SUSPEND_LEVEL_DISABLE_FB + 1,
+#endif
+};
+
+static int __init cpufreq_smartass_init(void)
+{
+ unsigned int i;
+ struct smartass_info_s *this_smartass;
+ debug_mask = 0;
+ up_rate_us = DEFAULT_UP_RATE_US;
+ down_rate_us = DEFAULT_DOWN_RATE_US;
+ sleep_ideal_freq = DEFAULT_SLEEP_IDEAL_FREQ;
+ sleep_wakeup_freq = DEFAULT_SLEEP_WAKEUP_FREQ;
+ awake_ideal_freq = DEFAULT_AWAKE_IDEAL_FREQ;
+ sample_rate_jiffies = DEFAULT_SAMPLE_RATE_JIFFIES;
+ ramp_up_step = DEFAULT_RAMP_UP_STEP;
+ ramp_down_step = DEFAULT_RAMP_DOWN_STEP;
+ max_cpu_load = DEFAULT_MAX_CPU_LOAD;
+ min_cpu_load = DEFAULT_MIN_CPU_LOAD;
+
+ spin_lock_init(&cpumask_lock);
+
+ suspended = 0;
+
+ /* Initalize per-cpu data: */
+ for_each_possible_cpu(i) {
+ this_smartass = &per_cpu(smartass_info, i);
+ this_smartass->enable = 0;
+ this_smartass->cur_policy = 0;
+ this_smartass->ramp_dir = 0;
+ this_smartass->time_in_idle = 0;
+ this_smartass->idle_exit_time = 0;
+ this_smartass->freq_change_time = 0;
+ this_smartass->freq_change_time_in_idle = 0;
+ this_smartass->cur_cpu_load = 0;
+ // intialize timer:
+ init_timer_deferrable(&this_smartass->timer);
+ this_smartass->timer.function = cpufreq_smartass_timer;
+ this_smartass->timer.data = i;
+ work_cpumask_test_and_clear(i);
+ }
+
+ // Scale up is high priority
+ up_wq = alloc_workqueue("ksmartass_up", WQ_HIGHPRI, 1);
+ down_wq = alloc_workqueue("ksmartass_down", 0, 1);
+ if (!up_wq || !down_wq)
+ return -ENOMEM;
+
+ INIT_WORK(&freq_scale_work, cpufreq_smartass_freq_change_time_work);
+
+ register_early_suspend(&smartass_power_suspend);
+
+ return cpufreq_register_governor(&cpufreq_gov_smartassv2);
+}
+
+#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_SMARTASSV2
+fs_initcall(cpufreq_smartass_init);
+#else
+module_init(cpufreq_smartass_init);
+#endif
+
+static void __exit cpufreq_smartass_exit(void)
+{
+ cpufreq_unregister_governor(&cpufreq_gov_smartassv2);
+ destroy_workqueue(up_wq);
+ destroy_workqueue(down_wq);
+}
+
+module_exit(cpufreq_smartass_exit);
+
+MODULE_AUTHOR ("Erasmux");
+MODULE_DESCRIPTION ("'cpufreq_smartass2' - A smart cpufreq governor");
+MODULE_LICENSE ("GPL");
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -447,6 +447,9 @@ extern struct cpufreq_governor cpufreq_g
#elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE)
extern struct cpufreq_governor cpufreq_gov_interactive;
#define CPUFREQ_DEFAULT_GOVERNOR (&cpufreq_gov_interactive)
+#elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_SMARTASSV2)
+extern struct cpufreq_governor cpufreq_gov_smartassv2;
+#define CPUFREQ_DEFAULT_GOVERNOR (&cpufreq_gov_smartassv2)
#endif
projects / ziggy471-l710-ics-kernel.git / commitdiff