--- ed3aa7a91afe3f6ac30a14404af7dea9a2ba595c
+++ fc722a025bd2927c0aa5346d12c610fb4d8fbce9
@@ -22,6 +22,7 @@
 #include <linux/kthread.h>
 #include <linux/mutex.h>
 #include <linux/freezer.h>
+#include <linux/usb/quirks.h>
 
 #include <asm/uaccess.h>
 #include <asm/byteorder.h>
@@ -647,6 +648,8 @@ static void hub_init_func3(struct work_s
 static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 {
 	struct usb_device *hdev = hub->hdev;
+	struct usb_hcd *hcd;
+	int ret;
 	int port1;
 	int status;
 	bool need_debounce_delay = false;
@@ -685,6 +688,25 @@ static void hub_activate(struct usb_hub
 			atomic_set(&to_usb_interface(hub->intfdev)->
 					pm_usage_cnt, 1);
 			return;		/* Continues at init2: below */
+		} else if (type == HUB_RESET_RESUME) {
+			/* The internal host controller state for the hub device
+			 * may be gone after a host power loss on system resume.
+			 * Update the device's info so the HW knows it's a hub.
+			 */
+			hcd = bus_to_hcd(hdev->bus);
+			if (hcd->driver->update_hub_device) {
+				ret = hcd->driver->update_hub_device(hcd, hdev,
+						&hub->tt, GFP_NOIO);
+				if (ret < 0) {
+					dev_err(hub->intfdev, "Host not "
+							"accepting hub info "
+							"update.\n");
+					dev_err(hub->intfdev, "LS/FS devices "
+							"and hubs may not work "
+							"under this hub\n.");
+				}
+			}
+			hub_power_on(hub, true);
 		} else {
 			hub_power_on(hub, true);
 		}
@@ -1768,7 +1790,6 @@ int usb_new_device(struct usb_device *ud
 	if (udev->parent)
 		usb_autoresume_device(udev->parent);
 
-	usb_detect_quirks(udev);
 	err = usb_enumerate_device(udev);	/* Read descriptors */
 	if (err < 0)
 		goto fail;
@@ -2683,6 +2704,11 @@ hub_port_init (struct usb_hub *hub, stru
 		udev->ttport = hdev->ttport;
 	} else if (udev->speed != USB_SPEED_HIGH
 			&& hdev->speed == USB_SPEED_HIGH) {
+		if (!hub->tt.hub) {
+			dev_err(&udev->dev, "parent hub has no TT\n");
+			retval = -EINVAL;
+			goto fail;
+		}
 		udev->tt = &hub->tt;
 		udev->ttport = port1;
 	}
@@ -2821,13 +2847,16 @@ hub_port_init (struct usb_hub *hub, stru
 	else
 		i = udev->descriptor.bMaxPacketSize0;
 	if (le16_to_cpu(udev->ep0.desc.wMaxPacketSize) != i) {
-		if (udev->speed != USB_SPEED_FULL ||
+		if (udev->speed == USB_SPEED_LOW ||
 				!(i == 8 || i == 16 || i == 32 || i == 64)) {
-			dev_err(&udev->dev, "ep0 maxpacket = %d\n", i);
+			dev_err(&udev->dev, "Invalid ep0 maxpacket: %d\n", i);
 			retval = -EMSGSIZE;
 			goto fail;
 		}
-		dev_dbg(&udev->dev, "ep0 maxpacket = %d\n", i);
+		if (udev->speed == USB_SPEED_FULL)
+			dev_dbg(&udev->dev, "ep0 maxpacket = %d\n", i);
+		else
+			dev_warn(&udev->dev, "Using ep0 maxpacket: %d\n", i);
 		udev->ep0.desc.wMaxPacketSize = cpu_to_le16(i);
 		usb_ep0_reinit(udev);
 	}
@@ -3063,6 +3092,10 @@ static void hub_port_connect_change(stru
 		if (status < 0)
 			goto loop;
 
+		usb_detect_quirks(udev);
+		if (udev->quirks & USB_QUIRK_DELAY_INIT)
+			msleep(1000);
+
 		/* consecutive bus-powered hubs aren't reliable; they can
 		 * violate the voltage drop budget.  if the new child has
 		 * a "powered" LED, users should notice we didn't enable it